Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Uživatelský manuál stáhnout pdf (Strana 258)

100

101

Displays and Graphics

Chapter 8

8-38

4. Press the {ENTER MESAGE} softkey. This highlights the softkey, and

the control displays the input prompt “PTO MESSAGE:” at the top of

the screen. Also, the current text, if any, of the selected message line

is shown on the input line next to the prompt. (The text may be

edited like any other input string.)

(softkey level 3)

ENTER

MESAGE

STORE

BACKUP

5. Once the line has been edited, press the <TRANSMIT> key. This

transfers the edited line to the PTO screen. After pressing the

<TRANSMIT> key, you can either:

edit another line

exit the PTO screen by pressing the up arrow softkey

6. To save changes to the system integrat or message lines, press the

{STORE BACKUP} softkey. When pressed, the softkey will be shown

in reverse video until the control has finished storing the lines.

Important: If the messages are not stored to EEPROM, the text will be

lost the next time the system is powered down.

(softkey level 3)

ENTER

MESAGE

STORE

BACKUP

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 819 820

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Uživatelský manuál Strana 258

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra