Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Uživatelský manuál stáhnout pdf (Strana 207)

100

101

Running a Program

Chapter 7

7-19

If you want to use the graphics feature, see page for QuickCheck with

graphics. To use the QuickCheck feature as described below without

graphics, the graphics option must be disabled.

To use the QuickCheck feature:

1. Select a program to check as described on page 7-6 and return to

softkey level 1.

2. Press the

{QUICK CHECK} softkey.

(softkey level 1)

PRGRAM

MANAGE

OFFSET MACRO

PARAM

QUICK

CHECK

SYSTEM

SUPORT

FRONT

PANEL

ERROR

MESAGE

PASS-

WORD

SWITCH

LANG

When you press the {QUICK CHECK} softkey, the QuickCheck

appears in reverse video and prompts the graphics option.

3. Press the

<CYCLE START> button. The control executes program

blocks as fast as it can process.

If a program block is found that contains an error, the program check stops

and the control displays the message “ERROR FOUND.”

To continue checking the remaining program blocks, press the

<CYCLE START> button again. If no more errors are found, the control

displays t h e message “COMPLETED WITH ERROR (S)” and the part

program is automatically deactivated to allow editing.

If the control finds no errors during QuickCheck, the program screen

displays the message “COMPLETED WITH NO ERRORS.” The control

then automatically resets the program to the first block.

To disableQ uickCheck: Press:

withoutthegraphicsoption the {QUICK CHECK} softkeyagain

withthe graphicsoption the {QUICK CHECK} softkey

followedby the {STOP CHECK}

softkey

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 819 820

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra Uživatelský manuál Strana 207

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 8520-GUM 9/Series CNC Grinder Operation and Progra