Rockwell-automation 2098-UWCPRG Ultraware Software User Manual Uživatelský manuál stáhnout pdf (Strana 240)

242 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011

Chapter 5 Configuring the Kinetix 3 Drive

Click Revert to return parameter settings to the values they held when you

opened this window.

1st Gear Ratio Specifies the 1st ratio of counts between the master input

counts and the motor encoder counts (for example 1:4).

The range of the ratio value is 1:1… 1:6,553,5:65,535.

2nd Gear Ratio Specifies the 1st ratio of counts between the master input

counts and the motor encoder counts (for example 1:4).

The range of the ratio value is from 1:1…1:6,553,5:65,535.

Digital Filter Cut-off Frequency The cutoff frequency of the low pass digital filter applied to the

pulse command input.

• Line Driver Input:

The range is 0.525, 0.562, 0.625, 0.750, 1.000, 1.500, 1,750,

and 3.000 MHz. Default is 1.750 MHz

• Open Collector Input:

The range is 0.525, 0.562, 0.625, 0.750, 1.000, 1.500, 1,750,

and 3.000 MHz. Default is 0.625 MHz

• High Frequency Line Driver Input:

The range is 0.525, 0.562, 0.625, 0.750, 1.000, 1.500, 1,750,

and 3.000 MHz. Default is 3.000 MHz

Command Description

Save Parameters Saves the current working values as power-up values in flash

memory for the selected On-Line drive and all of its children.

Parameter Description

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 353 354

Žádné komentáře

Rockwell-automation 2098-UWCPRG Ultraware Software User Manual Uživatelský manuál Strana 240