Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Uživatelský manuál stáhnout pdf (Strana 93)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 93

Using Explicit Messaging Chapter 6

Performing Explicit

Messaging

There are five basic events in the Explicit Messaging process. The details of each

step will vary depending on the type of controller being used. See the

documentation for your controller.

Figure 19 - Explicit Message Process

For information on the maximum number of Explicit Messages that can be

executed at a time, see the documentation for the bridge or scanner and/or

controller that is being used.

IMPORTANT

There must be a request message and a response message for all Explicit

Messages, whether you are reading or writing data.

Event Description

➊

You format the required data and set up the ladder logic program to send an Explicit Message request to the

scanner or bridge module (download).

➋

The scanner or bridge module transmits the Explicit Message Request to the slave device over the network.

➌

The slave device transmits the Explicit Message Response back to the scanner. The data is stored in the

scanner buffer.

➍

The controller retrieves the Explicit Message Response from the scanner’s buffer (upload).

➎

The Explicit Message is complete.

➎

➊

➋

➌

➍

Complete Explicit

Message

Retrieve Explicit

Message Response

Set up and send Explicit

Message Request

Ethernet

Switch

Network

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 189 190

Žádné komentáře

Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Uživatelský manuál Strana 93