Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Uživatelský manuál stáhnout pdf (Strana 25)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 25

Chapter 3

Configuring the Adapter

This chapter provides instructions and information for setting the parameters to

configure the embedded EtherNet/IP adapter.

For a list of parameters, see Appendix

B, Adapter Parameters. For definitions of

terms in this chapter, see the Glossary

Configuration Tools

The embedded EtherNet/IP adapter stores parameters and other information in

its own nonvolatile storage (NVS) memory. You must, therefore, access the

adapter to view and edit its parameters. The following tools can be used to access

the adapter parameters.

Topic Page

Configuration Tools

Using the PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM to Access Parameters

Setting the Adapter IP Address

Setting the Data Rate 31

Selecting Master-Slave or Peer-to-Peer Hierarchy 32

Setting a Fault Action

Setting Web Access Control 40

Resetting the Adapter 41

Restoring Adapter Parameters to Factory Defaults

Viewing the Adapter Status Using Parameters 42

Updating the Adapter Firmware 43

Tool See

PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM page 26

BOOTP server page 26

Connected Components Workbench software,

version 1.02 or later

http://www.ab.com/support/abdrives/webupdate/

software.html, or online help (installed with the software)

DriveExplorer software,

version 6.01 or later

http://www.ab.com/drives/driveexplorer

, or online help

(installed with the software)

DriveExecutive software,

version 5.01 or later

http://www.ab.com/drives/drivetools

, or online help

(installed with the software)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 189 190

Žádné komentáře

Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Uživatelský manuál Strana 25