Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Uživatelský manuál Strana 117

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 190
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 116
Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 117
Viewing the Adapter Web Pages Chapter 8
TCP/IP Configuration Web
Page
The TCP/IP Configuration web page provides information about the adapter’s
Ethernet settings and network activities. To view this web page, click the ‘TCP/
IP configuration’ link (highlighted in Figure 34
) in the navigation pane.
Figure 34 - Example of TCP/IP Configuration Web Page
Information Description
IP Address IP address of the adapter.
Subnet Mask Subnet mask for the adapter’s network.
Gateway Address Address for the gateway device on the adapter’s network.
BOOTP Shows status for BOOTP, which may be used to configure the adapter’s
network information.
Ethernet Address (MAC) Hardware address for the adapter.
Ethernet Received Packets Number of packets that the adapter has received.
Ethernet Receive Errors Number of receive errors reported by the hardware.
Ethernet Transmitted Packets Number of packets that the adapter has sent.
Ethernet Transmit Errors Number of transmit errors reported by the hardware.
EtherNet/IP Missed I/O Packets Number of I/O connection packets that the adapter did not receive.
Zobrazit stránku 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 189 190

Komentáře k této Příručce

Žádné komentáře