Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Uživatelský manuál Strana 112
- Strana / 190
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
112 Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
Chapter 7 Troubleshooting
Table 12 - Adapter Events
Code Event Description
Adapter Events
1 No Event Text displayed in an empty event queue entry.
2 Device Power Up Power was applied to the adapter.
3 Device Reset The adapter was reset.
4 EEPROM CRC Error The EEPROM checksum/CRC is incorrect, which limits adapter functionality. Default
parameter values must be loaded to clear this condition.
5 App Updated The adapter application firmware was flash updated.
6 Boot Updated The adapter boot firmware was flash updated.
7-24 Reserved —
DPI Events
25 DPI Manual Reset The adapter was reset.
26-28 Reserved —
Network Events
29 Net Link Up An network link was available for the adapter.
30 Net Link Down The network link was removed from the adapter.
31 Net Dup Address The adapter uses the same IP address as another device on the network.
32 Net Comm Fault The adapter detected a communications fault on the network.
33 Net Sent Reset The adapter received a reset from the network.
34 Net IO Close An I/O connection from the network to the adapter was closed.
35 Net Idle Fault The adapter received ‘idle’ packets from the network.
36 Net IO Open An I/O connection from the network to the adapter has been opened.
37 Net IO Timeout An I/O connection from the network to the adapter has timed out.
38 Net IO Size Err The adapter received an incorrectly sized I/O packet.
39 PCCC IO Close The device sending PCCC Control messages to the adapter has set the PCCC Control
Timeout to zero.
40 PCCC IO Open The adapter has begun receiving PCCC Control messages (the PCCC Control Timeout
was previously set to a non-zero value).
41 PCCC IO Timeout The adapter has not received a PCCC Control message for longer than the PCCC Control
Timeout.
42 Msg Ctrl Open The timeout attribute in either the CIP Register or Assembly object was written with a
non-zero value, allowing control messages to be sent to the adapter.
43 Msg Ctrl Close The timeout attribute in either the CIP Register or Assembly object was written with a
zero value, disallowing control messages to be sent to the adapter.
44 Msg Ctrl Timeout The timeout attribute in either the CIP Register or Assembly object elapsed between
accesses of those objects.
45 Peer IO Open The adapter received the first Peer I/O message.
46 Peer IO Timeout The adapter has not received a Peer I/O message for longer than the Peer I/O Timeout.
47-54 Reserved —
55 BOOTP Response The adapter received a response to its BOOTP request.
56 E-mail Failed The adapter encountered an error attempting to send a requested e-mail message.
57 Option Card Flt The adapter experienced a generic fault condition (drive only).
58 Module Defaulted The adapter has been set to defaults.
- User Manual 1
- Important User Information 2
- Summary of Changes 3
- New and Updated 3
- Information 3
- Table of Contents 5
- Conventions Used in This 9
- Rockwell Automation 9
- Additional Resources 10
- Getting Started 11
- Features 12
- Compatible Products 13
- Required Equipment 13
- Chapter 1 Getting Started 14
- Safety Precautions 15
- Quick Start 16
- Installing the Adapter 17
- Setting the IP Address 18
- Connecting the Adapter to 20
- Applying Power 21
- Commissioning the Adapter 24
- Configuring the Adapter 25
- Using the PowerFlex 20-HIM 26
- A6 or 20-HIM-C6S HIM to 26
- Access Parameters 26
- Setting the Adapter IP 26
- Enabled 1 27
- Disable the BOOTP Feature 30
- Set the IP Address 30
- Set the Subnet Mask 30
- Setting the Data Rate 31
- Selecting Master-Slave or 32
- Peer-to-Peer Hierarchy 32
- Enable Datalinks To Read Data 33
- 0<<2 35
- Custom Peer I/O Configuration 36
- 10.00 Secs 37
- Setting a Fault Action 38
- Setting Web Access Control 40
- Resetting the Adapter 41
- Restoring Adapter 41
- Parameters to Factory 41
- Defaults 41
- ESC soft 42
- Viewing the Adapter Status 42
- Using Parameters 42
- Updating the Adapter 43
- Firmware 43
- Configuring the I/O 45
- ControlLogix Example 46
- Chapter 4 Configuring the I/O 50
- Configuring the I/O Chapter 4 53
- ADC and Logix Memory 66
- Monitoring ADC Progress 71
- Using the I/O 79
- Understanding the 80
- ControlLogix Controller I/O 80
- Using Logic Command/Status 81
- Using Reference/Feedback 81
- Using Datalinks 82
- Example Ladder Logic 83
- Program Information 83
- ControlLogix Controller 84
- Using the I/O Chapter 5 85
- Versions 86
- Program 87
- Program Tags 88
- Example Datalink Data 89
- Generic Profile 90
- Using Explicit Messaging 91
- About Explicit Messaging 92
- Examples 94
- Single Parameter 96
- Multiple Parameters 101
- Request (Source Data) array 105
- Troubleshooting 107
- ENET Status Indicator 108
- LINK Status Indicator 108
- Viewing Adapter Diagnostic 109
- Viewing and Clearing Events 111
- Table 12 - Adapter Events 112
- Viewing the Adapter Web Pages 113
- Process Display Pop-up 116
- Dialog Box 116
- TCP/IP Configuration Web 117
- Web Page 118
- Device Information Pages 121
- EtherNet/IP adapter) 123
- Specifications 125
- Appendix A Specifications 126
- Adapter Parameters 127
- Parameter List 128
- EtherNet/IP Objects 137
- Identity Object 138
- Assembly Object 139
- Register Object 140
- PCCC Object 141
- N-Files 143
- DPI Device Object 145
- Class Attributes 146
- Instance Attributes 147
- DPI Parameter Object 148
- Formula number 150
- Extended DPI descriptor 150
- Descriptor Attributes 151
- Formulas for Converting 153
- Common Services 153
- Object Specific Services 153
- DPI Fault Object 154
- DPI Alarm Object 156
- DPI Diagnostic Object 158
- DPI Time Object 160
- Host DPI Parameter Object 162
- TCP/IP Interface Object 168
- Ethernet Link Object 170
- 750-Series Drives 173
- History of Changes 175
- Glossary 177
- Rockwell Automation Support 190
- Documentation Feedback 190
Související produkty a manuály pro Zařízení Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt
Zařízení Rockwell-automation 440P-WM5 Telescopic Arm Installation/Operating Ins Uživatelský manuál
(2 stránky)
(2 stránky)
Zařízení Rockwell-automation 190 Universal Instruction Sheet for Open Type Star Uživatelský manuál
(2 stránky)
(2 stránky)
Zařízení Rockwell-automation 440K Cadet 3 GD2 Compact Tongue Operated Interlock Uživatelský manuál
(4 stránky)
(4 stránky)
Zařízení Rockwell-automation 592-ECxHF E3 NEMA Size 5 Overload Relay Installati Uživatelský manuál
(2 stránky)
(2 stránky)
Zařízení Rockwell-automation 194RF-xxxx Front-Operating Disconnect and Handle w Uživatelský manuál
(6 stránky)
(6 stránky)
Zařízení Rockwell-automation 509-TA_ Size 00 Enclosure Cover Replacement Uživatelský manuál
(1 stránky)
(1 stránky)
Zařízení Rockwell-automation 825P Modular Protection System Quick Start Guide Uživatelský manuál
(32 stránky)
(32 stránky)
Zařízení Rockwell-automation 150-SBFC SMC-50 Soft Starter Fan Cover Installatio Uživatelský manuál
(2 stránky)
(2 stránky)
Zařízení Rockwell-automation 440P Small Metal Safety Position Switches Uživatelský manuál
(4 stránky)
(4 stránky)
Zařízení Rockwell-automation 281G ArmorStart - Safety Version - Getting Started Uživatelský manuál
(24 stránky)
(24 stránky)
Zařízení Rockwell-automation 800Z Touch Button and Guard Installation Uživatelský manuál
(1 stránky)
(1 stránky)
Zařízení Rockwell-automation 25B PowerFlex 520-Series IP30/NEMA 1/UL Type 1 Kit Uživatelský manuál
(2 stránky)
(2 stránky)
Zařízení Rockwell-automation 500 NEMA Non-Combination Starter Accessories for F Uživatelský manuál
(4 stránky)
(4 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.103 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce