Rockwell-automation AADvance Controller Configuration Guide Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Rockwell-automation AADvance Controller Configuration Guide. Rockwell Automation AADvance Controller Configuration Guide User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 286
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - Configuration Guide

AADvance The Next Step in Automation AADvance Controller Configuration Guide Issue: 07 DOCUMENT: 553633 ICSTT-RM405F-EN-P

Strany 2

   x Document: 553633 ICSTT-RM405f-EN-P Issue 07: Configuration Guide (AADvance Controller) Configuring Analogue Inputs ...

Strany 3

   5-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Example I/O Slot Configuration In the

Strany 4 - Issue Record

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-3 Example Controller Configuration This example controller has two 9110 processor modules a

Strany 5

   5-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) The slot and bus numbers must be the sam

Strany 6

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-5 4) Select the required module, then move the cursor to the right and select the number o

Strany 7

   5-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Move a Module to a Different Slot To mov

Strany 8 - Contents

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-7 Resize a Group of Modules You can reduce the size of a redundant group of modules from a

Strany 9

   5-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Enable or Disable the On-line Update F

Strany 10

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-9 Perform an On-line Update An on-line update changes the AADvance Workbench I/O configur

Strany 11

   5-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) StartModificationAre there any physical

Strany 12

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-11  Change application variables or the program.  Add new I/O base units, termination a

Strany 13

  Document: 553633 ICSTT-RM405f-EN-P Issue 07: xi Defining The AADvance Controller as a CIP Producer ...

Strany 14

   5-12 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure the I/O Module Process Safety

Strany 15 - Chapter 1

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-13  The variables dialog box opens. 4) Select the variable you declared in the Dictionar

Strany 16

   5-14 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) T9K_TA_GROUP_STATUS (I/O Module Status

Strany 17

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-15 <tagname>.XRUN BOOL Run status Reports the run status of module X TRUE: the module

Strany 18

   5-16 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) About Configuring I/O Channels The AAD

Strany 19 - Application Scan Model

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-17 3) Click the button adjacent to the Channel Variable fields. 4) Choose a data struct

Strany 20

   5-18 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Wire Variables to Digital Output Channe

Strany 21 - Throughput time:

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-19 Wire Variables to Analogue Output Channels To wire variables to analogue output channels

Strany 22

   5-20 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) T9K_DI_COMPACT and T9K_DI_FULL (Digital

Strany 23 - Chapter 2

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-21 <tagname>.STA USINT State Reports a state value for the channel: 1 = open circuit

Strany 24

   xii Document: 553633 ICSTT-RM405f-EN-P Issue 07: Configuration Guide (AADvance Controller) Create Links to Modbus Slaves ...

Strany 25

   5-22 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Threshold Values for Digital Inputs The

Strany 26

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-23

Strany 27

   5-24 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Define Thresholds for a Digital Input M

Strany 28

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-25 Default Thresholds for Digital Inputs The default threshold values for digital inputs ar

Strany 29

   5-26 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configuring Analogue Inputs You can w

Strany 30

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-27 <tagname>.CNT INT Raw count A count representing the current on the channel in uni

Strany 31

   5-28 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) HART The AADvance controller supports

Strany 32

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-29  AADvance uses a single dedicated Ethernet port for HART passthru communication.  Su

Strany 33 - Chapter 3

   5-30 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) HART Variables The two HART variables a

Strany 34

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-31 AIM_HART_FULL_01.I<tagname>.DEVICE BYTE Device status The device status byte mimi

Strany 35

  Document: 553633 ICSTT-RM405f-EN-P Issue 07: xiii Configure Analogue Output Boards ...

Strany 36

   5-32 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Table 11: T9K_AI_HART_FULL Data Stru

Strany 37

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-33 AIM_HART_FULL_01.ELAPSED DINT Elapsed time in ms. since last valid non passthrough commu

Strany 38

   5-34 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 8) Select the button and choose the

Strany 39

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-35 The AADvance provides a transparent connection between the asset management software an

Strany 40

   5-36 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configuration Procedure 1) In the Dict

Strany 41 - Chapter 4

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-37 6) Select the Control Booleans rack and ensure that the Channel 3 is wired to the HART_

Strany 42 - 4) Click the Update button

   5-38 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) About Threshold Values for Analogue I

Strany 43

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-39 Define Thresholds for an Analogue Input Module To define your own threshold values do th

Strany 44

   5-40 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Default Thresholds for Analogue Inputs

Strany 45

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-41 Configuring Digital Outputs You can wire digital output channels to the following varia

Strany 47

   5-42 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) <tagname>.CF BOOL Channel fault T

Strany 48 -  ControlFLASH installs

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-43 The State Variable for Digital Outputs The state variable for a digital output is an uns

Strany 49

   5-44 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Overcurrent Protection for Digital Outp

Strany 50

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-45 Faulted State for Digital Outputs A digital output channel is faulted (the state reports

Strany 51

   5-46 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  Off will disable the output channel

Strany 52

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-47 Status Variables for Digital Output Modules The 9451 digital output module provides a

Strany 53

   5-48 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Unwire Status Variables from a Digital

Strany 54

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-49 Group Field Power Health Direction: input to application from controller Type: boolean V

Strany 55

   5-50 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) A Module Field Power Voltage 1 Directio

Strany 56

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-51 Configuring Analogue Outputs You can wire analogue output channels to the following va

Strany 57

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 1-1 This chapter provides a brief overview of the AADvance Workbench and this manual. In This

Strany 58

   5-52 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) T9K_AO_COMPACT and T9K_AO_FULL (Analogu

Strany 59

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-53 <tagname>.STA USINT Channel state Reports a state value for the channel: 1 = no vf

Strany 60 -  Minimum: 1500ms

   5-54 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 1) Select the slot with the analogue

Strany 61

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-55

Strany 63 - Serial Port Parameters

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 6-1 This chapter provides an overview of the setting up process for the AADvance AADvance Wor

Strany 64

   6-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Compiler Verification Tool The Compiler

Strany 65

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 6-3  The Compiler Options dialog box is displayed. 3) If the Enable compilation verificati

Strany 66

   6-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Allocate IP Addresses for Network Commun

Strany 67

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 6-5 Configure the IP Address of the Target Controller To connect the AADvance Workbench proje

Strany 68

   1-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) CAUTION: Do not use XP Professional x64

Strany 69

   6-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) You have now configured the IP addresses

Strany 70

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 6-7 This page intentionally left blank

Strany 72

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 7-1 This chapter introduces the Dictionary in the AADvance Workbench. It explains how to crea

Strany 73

   7-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Type: Standard IEC 61131 types as a set

Strany 74

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 7-3  Example: 'Pump on'. Modbus: Modbus address of the variable, range 1 to 65,53

Strany 75

   7-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Create or Modify Variables in the Dict

Strany 76

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 7-5  A blue line will highlight the first element of the first row. 2) Select the element

Strany 77 - Unwire Processor Variables

   7-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Edit the Contents of a Row in the D

Strany 78

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 7-7 SOE Service Parameters The AADvance Workbench supports a Sequence of Events (SOE) servic

Strany 79 -  0 to 65,535

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 1-3 Programs can be simulated and tested and tested on the computer before downloading to the

Strany 80

   7-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) This page intentionally left b

Strany 81

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-1 This chapter introduces CIP over EtherNet/IP, and shows how to configure the protocol with

Strany 82

   8-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Note: The CIP Protocol is intended to al

Strany 83

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-3  The AADvance Workbench inserts a network into the Hardware Architecture view. 4) Crea

Strany 84

   8-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Data Types for CIP over Ethernet/IP Yo

Strany 85

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-5 Parameters for CIP Producer and Consumer Varaibles Each production variable and consumpti

Strany 86

   8-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure an AADvance Variable as a Prod

Strany 87

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-7 3) In the Select Module dialog box select Ethernet Module. 4) Open the properties

Strany 88

   8-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure an AADvance Variable as a Cons

Strany 89 -  0 to 59

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-9 The port is the communications route from ControlLogix. The value for the port should alw

Strany 90

   1-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) The AADvance Workbench provides pre-defi

Strany 91

   8-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Obtaining the Connection Status for a C

Strany 92

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-11 You can now examine the structure of 'T' within the Dictionary: The AADvance

Strany 93

   8-12 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  Each produced tag uses (1 + number

Strany 94

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-13  If the produce tags are all unicast, 40 connections will be used in the controller (2

Strany 95

   8-14 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Set the RSLogix UNICAST Configuration T

Strany 96

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 8-15 Further Information on CIP over Ethernet/IP CIP over Ethernet/IP was created by Rockwell

Strany 98

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-1 This chapter describes the process to configure the AADvance controller for Modbus master

Strany 99 - Chapter 5

   9-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Modbus Master The AADvance controller

Strany 100

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-3 The Modbus RTU slave devices are connected to one or more of the serial ports on the con

Strany 101

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 1-5 Application Scan Model The application scan model for the AADvance controller is shown in

Strany 102

   9-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Modbus Master Command Set The AADvance

Strany 103

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-5 Note: The original Modbus standard defines the address field as a four-digit field, but w

Strany 104

   9-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) The illustration shows the message sched

Strany 105

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-7 8 Slave 2 Message 1 Repeat message 9 Slave 3 Message 3 End

Strany 106

   9-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Modbus Service Parameters When a Modbus

Strany 107 - Perform an On-line Update

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-9 Modbus Exception Responses The AADvance controller uses the lack of a response from a sla

Strany 108

   9-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Maximum number of messages 400 Planni

Strany 109

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-11 Connect a Slave Device, Full Duplex You can use a full duplex serial connection to conne

Strany 110

   9-12 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Connect Multiple Slave Devices, Full Du

Strany 111

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-13 Connect a Slave Device, Half Duplex You can use a half duplex serial connection to conne

Strany 112

   ii Document: 553633 ICSTT-RM405f-EN-P Issue: 07 Configuration Guide (AADvance Controller) This page intentionally left

Strany 113

   1-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Scan Times The following scan times were

Strany 114

   9-14 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Connect Multiple Slave Devices, Half Du

Strany 115

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-15 Configure the Serial Ports for Modbus Master When you use a serial port on the AADvance

Strany 116

   9-16 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Serial Port Parameters Each serial port

Strany 117

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-17  The identity of the serial or Ethernet port you intend to use. The AADvance Workbench

Strany 118

   9-18 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Create a Modbus Master Object Note: Y

Strany 119

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-19 Modbus Master Communication and Control Settings Each Modbus master object has a set of

Strany 120

   9-20 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Table 25: Modbus Master Communication

Strany 121

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-21 Configure a Modbus Master Object for Modbus RTU Note: You have to create a Modbus Master

Strany 122

   9-22 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure a Modbus Master Object for M

Strany 123

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-23 Choosing Names for Modbus Objects The Modbus object Name identifies a Modbus master obj

Strany 124

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 1-7 Throughput time: min = 125.1ms Avg = 18

Strany 125

   9-24 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) The interval applies to all transmissi

Strany 126

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-25 Controlling a Modbus Master Object Every Modbus master object has a pair of registers (h

Strany 127

   9-26 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Modbus Ping Mode, Interval and Address

Strany 128 - The two HART variables are:

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-27 5) Check that the Ping Interval is suitable for your application.  The ping interva

Strany 129

   9-28 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  The ping interval is specified indiv

Strany 130

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-29 2) Select the Slave link associated with the master object.  The editor for the sla

Strany 131

   9-30 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 2) Select a slave link associated with

Strany 132

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-31 Restart a Slave with Ping disabled 1) Configure the salve with a Control Variable Addre

Strany 133

   9-32 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure Statistics for a Modbus Mas

Strany 134

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-33 Description Value(s) Default Remarks Reporting Mode Disabled; Last Rate; Maximum Rate: A

Strany 136

   9-34 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Modbus Slave Link Identification and Co

Strany 137

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-35 Table 30: Modbus TCP Link Identification and Control Settings Description Value(s) De

Strany 138

   9-36 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure a Modbus Slave Link for Modbu

Strany 139

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-37 8) Specify the Slave Wait Interval (in milliseconds), or accept the default. 9) Set th

Strany 140

   9-38 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 8) If you intend to use the control va

Strany 141

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-39 Modbus Slave Commands The AADvance controller supports a subset of Modbus standard com

Strany 142

   9-40 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Read Holding Registers Function: read F

Strany 143

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-41 Write Multiple Coils Function: write Function Code = 15 Address Offset: COIL_STATUS_ADDR

Strany 144

   9-42 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Value Meaning Description 0 Inactive Di

Strany 145

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-43 Add Messages for a Modbus Slave The slave link object uses a list of messages to hold th

Strany 146

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 2-1 This chapter provides the instructions to install and license the AADvance Workbench. In

Strany 147 - Field Power Status Integers

   9-44 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 10) The Comment field is a free text fi

Strany 148

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-45 Modbus Slave Link Message Parameters Each Modbus slave link message has a set of param

Strany 149

   9-46 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Write Holding Registers Input Registers

Strany 150

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 9-47  The default values disable the statistics reporting. 3) Set the Reporting Mode. 4)

Strany 151

   9-48 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Remove all Slave Links You can remove a

Strany 152

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-1 AADvance provides SNCP and supports both variable bindings functionality and IXL communi

Strany 153

   10-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) SNCP Networks You can set up a singl

Strany 154

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-3  The Workbench will always use the first address that you configure for the SNCP_Workb

Strany 155 - Chapter 6

   10-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  Config 2 set IP Address 2 = 10.44.20

Strany 156

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-5 Set Up Multiple SNCP Networks Multiple logical Networks The Workbench also supports mult

Strany 157 -  You have now enabled CVT

   2-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Installing Workbench Part Numbers: T9082

Strany 158

   10-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure a Dual Network 1) To configu

Strany 159

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-7  This configuration provides two logical networks and three physical networks. 3) C

Strany 160

   10-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) BindRespTimeout This timeout is used in

Strany 161

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-9 Secondly this timeout value is also used to check the age of binding data message receiv

Strany 162

   10-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 00 3) Select the Network tab and ente

Strany 163 - Chapter 7

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-11  Two links are set up between the resources 4) From the menus Select Project Int

Strany 164

   10-12 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  The Binding Dialog box opens. 6)

Strany 165

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 10-13 8) Select both Network instances. With this configuration the SNCP binding driver wil

Strany 166

   10-14 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) SNCP_KVB_ERR_NO_PRODUCER 0x04 At the b

Strany 167

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-1 AADvance provides the options to set up a Peer-to-Peer network. The Peer-to-Peer protoco

Strany 168

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 2-3 Accept the License Agreement and the installation will commence.  The default is to in

Strany 169

   11-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Peer to Peer Configuration Process Co

Strany 170

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-3  The peer identity gives the position of the controller's IP address in the Peer

Strany 171 - Chapter 8

   11-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  The subnet DPXPNC40 set up screen is

Strany 172

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-5  Refresh Timeout - Enter a value in the range 0 to 10000ms. This value sets the time t

Strany 173

   11-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Set up the Peer IP Addresses and Status

Strany 174

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-7 Configure Input Boards 1) Select the input source. 2) Add an input board. Configu

Strany 175

   11-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  Refresh Timeout - Enter a value in t

Strany 176

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-9 Wire the Analogue Input Status Variables 1) Select the required row from the list shown

Strany 177

   11-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  check box to set the variable type

Strany 178

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-11  Wire Digital Input Board Status Variables 1) Select the required row from the lis

Strany 179

   2-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  When the installation is complete you

Strany 180

   11-12 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Wire Digital Input Channel Data Variab

Strany 181

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-13 Configure Output Boards To configure an output for a peer network do the following: 1

Strany 182

   11-14 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure Analogue Output Boards 1) S

Strany 183

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-15 Wire the Analogue Output Channel Variables Analogue output channels send analogue data

Strany 184

   11-16 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure Digital Output Board 1) S

Strany 185

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-17 2) Select a Channel row. 3) Select a W button to connect to a variable.  The output

Strany 186

   11-18 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Peer to Peer Configuration Example 1

Strany 187 - Chapter 9

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-19 Peer-to-Peer Controller Setting Summary You should follow the process described in this

Strany 188

   11-20 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Peer ID 1 Identity of this controller

Strany 189

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-21 Enable Controller TRUE TRUE TRUE Master Slave FALSE FALSE FALSE Peer List Peer 1 10.

Strany 190

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 2-5 Add and Activate a New AADvance Workbench License You use the following AADvance Licens

Strany 191 - Modbus Message Scheduling

   11-22 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Dual Peer-to-Peer Net control Network

Strany 192

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-23 Table 41: Controller 4 Controller 4 dxpnc40 - Control Rack Chassis 1 Slot 8 Netw

Strany 193

   11-24 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Peer to Peer Data Summary Output Dat

Strany 194

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 11-25 Table 44: Controller 4 Controller 4 DATA RACK dxpdi Network Identity 1 Source Peer I

Strany 196

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 12-1 Glossary of Terms A accuracy The degree of conformity of a measure to a standard or

Strany 197

   12-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) black channel A communication path whos

Strany 198

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 12-3 Glossary of Terms Compiler Verification Tool (CVT) The Compiler Verification Tool (C

Strany 199

   12-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) expansion cable assembly A flexible int

Strany 200

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 12-5 Glossary of Terms HART HART (Highway Addressable Remote Transducer) is an open proto

Strany 201

   2-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 4) The AADvance license Features option

Strany 202

   12-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) L ladder diagram An IEC 61131 language

Strany 203 - Insert the Modbus Master Bus

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 12-7 Glossary of Terms pinging In Modbus communications, sending the diagnostic Query Dat

Strany 204

   12-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) RTU Remote terminal unit. The Modbus pr

Strany 205 - 'General'

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 12-9 Glossary of Terms T TA See 'termination assembly'. target An attribute of

Strany 207

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 13-1 For more information about the AADvance system refer to the associated Rockwell Automati

Strany 208

   13-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) PFH avg and PFDavg Data This document c

Strany 209

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 2-7 10) Send the email. Note: If the computer does not have an email client configured, copy

Strany 210

  Document: 553633 ICSTT-RM405f-EN-P Issue :07 iii Notice In no event will Rockwell Automation be responsible or liable for indirec

Strany 211

   2-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 2) Send the User Codes by email to ke

Strany 212

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 2-9 Set Up a Server for Hardware Floating Licenses To set up a primary server for hardware fl

Strany 213

   2-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Set Access to Floating Licenses To set

Strany 214

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 3-1 This chapter describes the procedures for connecting the AADvance Workbench to the control

Strany 215

   3-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Double-clicking on an entry in the list

Strany 216

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 3-3 Discover Communications Fault-Finding This procedure describes how to activate communicat

Strany 217

   3-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  The AADvanceDiscover utility scans th

Strany 218

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 3-5 8) Refresh the screen to confirm that the new resource number is displayed in the resour

Strany 219

   3-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 6) Enter the IP Address and Subnet Mas

Strany 220

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 3-7 Save and Load a Configuration When you have entered the IP Address details you can now sa

Strany 221

   iv Document: 553633 ICSTT-RM405f-EN-P Issue: 07 Configuration Guide (AADvance Controller) Issue Record Issue Date Comments 01 Jan

Strany 222

   3-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 2) Give the configuration a name and sa

Strany 223

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-1 This chapter describes the process to configure the processor modules: In This Chapter Vi

Strany 224

   4-2 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 4) Click the Update button.

Strany 225 - Ethernet and Serial Port

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-3  The window now shows your controller's current firmware version information. T

Strany 226

   4-4 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  The saved text file can be viewed in

Strany 227

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-5 ControlFLASH Firmware Upgrades The AADvance controller supports upgrades of processor mod

Strany 228

   4-6 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) The RSLinx Classic Lite software must be

Strany 229

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-7 4) Click Browse to select the location of the installation or Next to select the defau

Strany 230

   4-8 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  ControlFLASH installs. 6) To la

Strany 231

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-9  ControlFLASH will launch and you can now upgrade the Processor Module firmware. U

Strany 232

  Document: 553633 ICSTT-RM405f-EN-P Issue :07 v Notes and Symbols used in this manual This symbol calls attention to items wh

Strany 233 - Remove a Slave Link

   4-10 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 2) Click Next. 3) Select T9110 from

Strany 234

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-11 5) Select the firmware revision for the latest Release. 6) Check the summary det

Strany 235 - Chapter 10

   4-12 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) The continue message is displayed: 7

Strany 236

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-13  When the progress bar reaches the end, it may take several minutes for the next scr

Strany 237

   4-14 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  The following message now appears.

Strany 238

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-15 4) Click Browse to select the location of the installation or Next to choose the defaul

Strany 239

   4-16 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 4) Browse to the device in the RSLin

Strany 240

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-17 6) Check the summary details, click Finish The continue message is displayed: 7)

Strany 241

   4-18 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  A progress bar is displayed Note:

Strany 242

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-19  After the progress bar reaches the end, it may take several minutes for the next scre

Strany 243

   vi Document: 553633 ICSTT-RM405f-EN-P Issue: 07 Configuration Guide (AADvance Controller) Forward This manual defines how to co

Strany 244 -  Update Timeout = 60000

   4-20 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Note: Selecting Standard or Mixed will

Strany 245

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-21 Set PST to its Default Value You can reset the PST to its default value, do the followin

Strany 246

   4-22 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure the Serial Ports The AADvance

Strany 247 - SNCP Binding Error Variables

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-23 Serial Port Protocols The serial ports support the protocols listed in the table. Tabl

Strany 248

   4-24 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Time Synchronization (SNTP) The AADvan

Strany 249 - Chapter 11

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-25 Note: The first address represents that of the primary server and the second one the sec

Strany 250

   4-26 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  If you select Unicast mode for a pro

Strany 251 -  A SN01 subnet is set up

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-27 Using the Controller as a Modbus Slave The AADvance controller can operate as a Modbus

Strany 252

   4-28 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Configure the Controller Modbus Slaves

Strany 253

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-29 Note: The Port field does not apply for a serial connection, and is disabled. 5) If you

Strany 255 - Configure Input Boards

   4-30 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Id 1 to 255 1 Port 0 to 65,535 502 T

Strany 256

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-31 5) Click on the S1-1 row and set the required Inactivity and Idle values.  Inactiv

Strany 257

   4-32 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) DiffServ Configuration This option al

Strany 258

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-33  A tick in the box enables the DiffServ function 3) Select a Value for TCP Negotiatio

Strany 259

   4-34 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Ethernet Forwarding When enabled, the &

Strany 260

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-35 2) Stop the resource running. 3) From the Start button select AADvance Discover uti

Strany 261 - Configure Output Boards

   4-36 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 6) Select the Enable Ethernet Forwardi

Strany 262

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-37 1) Select the Variables tab of the 9110 Processor Editor.  The 9110 Variables Edito

Strany 263 -  checked = REAL

   4-38 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Status Integers The variables in the ra

Strany 264

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-39 Processor Module B Temperature Direction: input to application from controller Type: wor

Strany 265

   viii Document: 553633 ICSTT-RM405f-EN-P Issue 07: Configuration Guide (AADvance Controller) Contents Chapter 1 Introductio

Strany 266

   4-40 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Control Integers The variables in the

Strany 267

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-41  FALSE = No fault reset button is active.  Default: FALSE Description: Reports that

Strany 268

   4-42 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Processor Module B On-line Direction: i

Strany 269

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-43 Processor Module B Health Direction: input to application from controller Type: boolean

Strany 270

   4-44 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) Direction: input to application from co

Strany 271

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-45 Processor Module A Ready Direction: input to application from controller Type: boolean V

Strany 272 - Input Data

   4-46 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller)  FALSE = The voltage of the back-up b

Strany 273

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-47 Control Booleans The variables in the rack of control booleans enable the application to

Strany 274

   4-48 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) HART Passthrough Direction: Appliction

Strany 275 - Glossary of Terms

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-49 RTC Status: Day of Month Direction: input to application from controller Type: word Valu

Strany 276

  Document: 553633 ICSTT-RM405f-EN-P Issue 07: ix Serial Port Parameters ...

Strany 277

   4-50 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) RTC Status: Seconds Direction: input to

Strany 278

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-51 RTC Program: Year Direction: output from application to controller Type: word Values: 

Strany 279

   4-52 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) RTC Program: Hours Direction: output fr

Strany 280

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-53  Default 0 (zero) Description: Specifies the time of day (in milliseconds) to be writt

Strany 281

   4-54 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) RTC Control: RTC Read Direction: output

Strany 282

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-55 RTC Control: Month Direction: output from application to controller Type: boolean Values

Strany 283

   4-56 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) RTC Control: Hours Direction: output fr

Strany 284

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 4-57 Description: Defines whether the value of the RTC program variable named Seconds should

Strany 285 - Chapter 13

   4-58 Document: 553633 ICSTT-RM405f-EN-P Issue 07 Configuration Guide (AADvance Controller) 6) Set RTC Read to be always True (the

Strany 286

  Document: 553633 ICSTT-RM405f-EN-P Issue 07 5-1 This chapter describes the configuration process for defining the controller I/O hardware

Komentáře k této Příručce

Žádné komentáře