Rockwell-automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device Uživatelský manuál stáhnout pdf (Strana 43)

Ethernet-to-DeviceNet Linking Device 43

Rockwell Automation Publication 1788-IN055C-EN-P - September 2011

Module Status Indicator

Ethernet Link Status Indicator

The Ethernet Link status indicator indicates that the module is connected to an

Ethernet network. The status indicator displays green if the link is active. The

status indicator will flash when Ethernet packets are received and transmitted.

Ethernet Network Status Indicators

DeviceNet Module Status Indicator States

Indicator Status Description

Flashing green Standby or not

configured

The module has not been configured and is

currently using default values.

This status indicator state is also used to indicate

that the module is in a standby state. This could

occur during initialization or DeviceNet autobaud.

Solid green Normal Normal operation.

Solid red Unrecoverable major

fault

A fault the requires user intervention has been

detected. Correct the problem and reset the linking

device.

Flashing red Recoverable minor

fault

A fault that can be corrected and does not require a

linking device reset has been detected.

Ethernet Network Status Indicator States

Indicator Status Description

Off No IP address The module has no IP address assigned.

Solid green Network OK and

communicating

There is at least one EtherNet/IP connection.

Flashing green Network OK There are no active connections.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Žádné komentáře

Rockwell-automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device Uživatelský manuál Strana 43