Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Uživatelský manuál stáhnout pdf (Strana 345)

Publication 1760-UM002B-EN-P - March 2005

Pico GFX-70 Settings 7-17

Activating RUN Mode

If Pico GFX-70 displays RUN MODE ✓, this means that Pico GFX-70 will start

in Run mode when the supply voltage is applied.

1. Otherwise select RUN MODE and press OK.

RUN mode is activated.

2. Press ESC to return to the Status display.

Deactivating RUN Mode

1. Select RUN MODE ✓.

2. Press OK.

The RUN mode function is deactivated.

The default setting for Pico GFX-70 is for RUN MODE to be displayed. In

other words, Pico GFX-70 starts in

RUN MODE ✓ when the power is switched

on.

Behavior When the Circuit Diagram is Deleted

The setting for the startup behavior is a Pico GFX-70 device function. When

the circuit diagram is deleted, this does not result in the loss of the setting

selected.

Behavior During Upload/Download to Module or PC

When a valid circuit diagram is transferred from Pico GFX-70 to a memory

module or the PC or vice versa, the setting is still retained.

DEBOUNCE ✓ ▲

P BUTTONS

RUN MODE ✓

CARD MODE ▼

DEBOUNCE ✓ ▲

P BUTTONS

RUN MODE

CARD MODE ▼

Startup behavior Menu display Status of Pico GFX-70

after startup

Pico GFX-70 starts in STOP

mode

RUN MODE Pico GFX-70 is in STOP mode

Pico GFX-70 starts in RUN

mode

RUN MODE

✓ Pico GFX-70 is in RUN mode

IMPORTANT

The GFX models without a display can only be started in

RUN mode.

1 2 ... 340 341 342 343 344 345 346 347 348 349 350 ... 399 400

Komentáře k této Příručce

Žádné komentáře