Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Uživatelský manuál Strana 343

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 400
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 342
Publication 1760-UM002B-EN-P - March 2005
Pico GFX-70 Settings 7-15
Activating and Deactivating
the P Buttons
Even though the cursor buttons (P buttons) have been set as push button
actuator inputs in the circuit diagram, this function is not activated
automatically. This prevents any unauthorized use of the cursor buttons. The P
buttons can be activated in the System menu.
The P buttons are activated and deactivated via the P BUTTONS menu.
1. Press DEL and ALT to call up the System menu.
2. Select the SYSTEM menu.
3. Move to the cursor to the P BUTTONS menu.
Activating the P Buttons
If Pico GFX-70 is displaying P BUTTONS , this means that the P buttons are
active.
1. Otherwise select P BUTTONS and press OK.
Pico GFX-70 changes the display to
P BUTTONS and the P buttons
are activated.
2. Press ESC to return to the Status display.
The P buttons are only active in the Status display. In this display you
can use the P buttons to activate inputs in your circuit diagram.
IMPORTANT
How Pico GFX-70 input and output signals are processed
internally is explained in Delay Times for Inputs and Outputs on
page 8-5.
IMPORTANT
If Pico GFX-70 is password-protected you cannot open the
System menu until you have “unlocked” it.
DEBOUNCE
P BUTTONS
RUN MODE
CARD MODE
DEBOUNCE
P BUTTONS
RUN MODE
CARD MODE
DEBOUNCE
P BUTTONS
RUN MODE
CARD MODE
Zobrazit stránku 342
1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 399 400

Komentáře k této Příručce

Žádné komentáře