Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Uživatelský manuál stáhnout pdf (Strana 150)

Publication 1760-UM002B-EN-P - March 2005

4-40 Wiring with Pico GFX-70

Analog Value Comparator/Threshold Value Switch

Pico GFX-70 provides 32 analog value comparators from A 01 to A 32.

With an analog value comparator or threshold value switch you can, for

example, compare analog input values with a set point value.

All Pico GFX-70 DC variants have analog inputs.

The following comparisons are possible:

• Function block input

>I1 greater than or equal to, equal to, less than or

equal to function block input

>I2

• Using the factors >F1 and >F2 as inputs enables you to amplify and

adjust the values of the function block inputs.

• The

>OS function block input can be used as an offset for the >I1 input.

• The

>HY function block input is used for the positive and negative

switching hysteresis of the input

>I2. The contact switches according to

the selected comparison mode of the function block.

ATTENTION

The function blocks are designed so that a function block

output can be assigned directly to the input of another

function block. This enables you always to have an

overview of which value is transferred.

If different data formats are used, such as if the first

function block uses 32 bits and an 8-bit or 16-bit format is

used for further processing, sign value errors or value

errors may occur when transferring from one function

block to another one.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 399 400

Komentáře k této Příručce

Žádné komentáře