Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Uživatelský manuál stáhnout pdf (Strana 18)

2-2

EtherNet/IP Communcations Module

2.1 Required Equipment

Table 2.1 lists the equipment shipped with the EtherNet/IP module.

When you unpack the module, verify that the package includes all of

these items.

To install and configure the EtherNet/IP module, you must supply

the items listed in table 2.2.

Table 2.1 – Equipment Shipped with the EtherNet/IP Module

Item Description

One EtherNet/IP Communications module

One 2.54 cm (1 in) and one 15.24 cm (6 in) Internal Interface cable

(only one of these cables is needed to connect the module to the

drive)

One EtherNet/IP Communications module User Manual (D2-3510)

Table 2.2 – User-Supplied Items Required for Installation

Item Description

Small flathead or Phillips screwdriver

Ethernet cable (Refer to the EtherNet/IP Media Planning and

Installation Manual, publication ENET-IN001..., for details.)

Configuration tool, such as

• SP600 LCD OIM, GV6000 LCD OIM, or LiquiFlo 2.0 LCD OIM

• VS Utilities

• BOOTP Server (version 2.1 or higher) for network setup only

Controller configuration software (for example: RSLogix 5,

RSLogix 500, RSLogix 5000 software)

PC connection to the EtherNet/IP network.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 193 194

Žádné komentáře

Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Uživatelský manuál Strana 18