Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Uživatelský manuál Strana 122

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 194
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 121
B-4
EtherNet/IP Communications Module
Sets the bytes of the gateway address.
Important: To set the gateway address using these parameters,
parameter 3 (BOOTP) must be set to Disabled.
Configures the network data rate and duplex mode at which the
module communicates. Updates EN Rate Act (17) after reset.
12
13
14
15
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Ye s
255 . 255 . 255 . 255
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4
16 EN Rate Cfg
Range: 0 = Autodetect
1 = 10 Mbps Full
2 = 10 Mbps Half
3 = 100 Mbps Full
4 = 100 Mbps Half
Default: 0 = Autodetect
Type: Read/Write
Reset Required: Ye s
Zobrazit stránku 121
1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 193 194

Komentáře k této Příručce

Žádné komentáře