Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Uživatelský manuál stáhnout pdf (Strana 268)

268 Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012

Appendix D Logix Communication and Controller Configuration

The Request History field displays

all of the devices in your network

that need IP addresses.

The EtherNet/IP (MAC) addresses

correspond to the pre-loaded

addresses and typically are marked

on the device labels.

3. Double-click a request from one of

the devices.

4. Enter a unique IP address for each

device.

5. Click OK.

If you are not on an isolated

network, obtain the IP addresses

from your network administrator.

6. Repeat step 3…step 5 for each device, except the PanelView Plus terminal.

7. Select the first device in the Relation

List field.

8. Click Disable BOOTP/DHCP.

9. Repeat step 7 and step 8 for all

devices except the PanelView Plus

terminal.

10. Close the BOOTP/DHCP utility.

If prompted to save changes, click

No.

IMPORTANT

If you cycle power, the device will not retain its IP

address unless you disable BOOTP/DHCP.

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 277 278

Žádné komentáře

Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Uživatelský manuál Strana 268