Rockwell-automation 25-COMM-P PowerFlex PROFIBUS DPV1 Adapter Uživatelský manuál Strana 44

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 94
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 43
44 Rockwell Automation Publication 520COM-UM004A-EN-E - November 2013
Chapter 5 Using the I/O
makeup of the I/O connection in a running system. The I/O connection with
the controller must first be disabled to allow changes to the respective Datalinks.
Depending on the controller being used, the I/O connection can be disabled by:
Putting the controller in Program mode
Placing the master in idle mode
Disconnecting the drive from the network
I/O Communication
The following example describes how to use PROFIBUS DPV0 I/O
communication for the CompactLogix controller for the PROFIBUS MVI69-
PDPMV1 Master.
I/O data transferred to and from the 25-COMM-P adapter nodes can be viewed
in the MVI69-PDPMV1 CompactLogix controller tags for the DPV0 cyclic
communication connections. See Input Mapping in the MVI69-PDPMV1
on
page 44 and Output Mapping in the MVI69-PDPMV1 on page 45 for input and
output mapping in the MVI69-PDPMV1.
Input Mapping in the MVI69-PDPMV1
Zobrazit stránku 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 93 94

Komentáře k této Příručce

Žádné komentáře