Rockwell-automation 2098-IPD-xxx Ultra5000 C Programming using the Mot Uživatelský manuál stáhnout pdf (Strana 53)

Publication 2098-PM001E-EN-P — July 2002

Referencing the Motion Library 2-13

long EncoderSetPolarity(long channel, long polarity);

Sets the polarity of the specified encoder channel.

Valid channel arguments are:

• 1 = Motor Encoder

• 2 = Auxiliary Encoder

Valid polarity arguments are:

• 0 = Positive

• 1 = Negative

Returns 0 if successful, or -1 on an error.

long RatchetSetMode(long mode);

Set the ratchet mode.

The mode selects the ratchet mode. Valid modes are as follows:

• 0 = Normal

• 1 = Ratchet

• 2 = Buffered

Returns 0 if successful, or -1 on an error.

ATTENTION

!

Frame time is limited - adding excessive code to the

sequencer will force an Excess CPU Load error and

fault the drive.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 113 114

Komentáře k této Příručce

Žádné komentáře