Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Uživatelský manuál stáhnout pdf (Strana 37)

Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013 37

Configuring the Adapter Chapter 3

The adapter is ready to receive I/O from the master (that is, scanner). You must

now configure the scanner to recognize and transmit I/O to the adapter. See

Chapter

4, Configuring the I/O.

Setting the Adapter to Transmit Peer-to-Peer Data (Drive-to-Drive

Communication)

1. Verif y that Parameter 53 - [Peer Out Enable] is set to ‘0’ (Off ).

This parameter must be Off while you configure peer output parameters.

2. Set Parameter 51 - [Peer A Output] to select the source of the data to

output to the network.

3. If desired, set Parameter 52 - [Peer B Output] to select an additional

source of the data to output to the network.

4. Set Parameters 54 - [Peer Out Time] and 55 - [Peer Out Skip] to

establish the minimum and maximum intervals between peer messages.

Value Setting

0 Off (Default)

1On

Port 5 Device

20-COMM-ER

Parameter #: 53

Peer Out Enable

Off

Port 5 Device

20-COMM-ER

Parameter #: 51

Peer A Output

Cmd/Ref

Value Description

0 Off (Default)

1 Logic Command/Reference

2…5 Datalink A, B, C, or D Input

6…9 Datalink A, B, C, or D Output

Port 5 Device

20-COMM-ER

Parameter #: 52

Peer B Output

DL A Input

Value Description

0 Off (Default)

1 Logic Command/Reference

2…5 Datalink A, B, C, or D Input

6…9 Datalink A, B, C, or D Output

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 237 238

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Uživatelský manuál Strana 37

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun