Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Uživatelský manuál stáhnout pdf (Strana 50)

3-12 Configuring the Module

When the Configuration Mode Switch (SW1 in Figure 2.1) is in the

PARAM (Parameter) position, the 1769-SM2 uses its internal parameter

settings to configure the module. If any configuration data is downloaded

by the controller, it will be ignored.

Important: When the Parameter mode is used, the configuration data

size in the controller should be set to “0.” See Controller

Mode on page 3-3 for more information.

Host PowerFlex 4-Class drives can use this feature since connected DSI

peripheral devices (optional, external PowerFlex 4-Class HIMs,

DriveExplorer with 22-SCM-232, etc.) can access the 1769-SM2 module

directly. However, the 1769-SM2 module must be set to Single mode for

these DSI peripherals to work with the module.

Figure 3.13 DriveExplorer Window with Mapped 1769-SM2 Compact I/O Module

Parameter Mode

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 203 204

Žádné komentáře

Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Uživatelský manuál Strana 50