Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Uživatelský manuál stáhnout pdf (Strana 53)

Publication 1761-UM006E-EN-P - August 2005

ENI/ENIW Configuration (Nodes 241 to 254) 4-13

These parameters are described in more detail in the following

sections.

Node 254 - Ethernet Hardware Address

You will find the hardware address on a label affixed to the ENI/ENIW

as shown to the left. The hardware address can also be read from

node address 254.

250 TCP/IP Configuration Integers 4, 8, 12, 16,

or 20

Valid IP Address 000.000.000.000

192.168.1.254

(5)

249 From String ASCII String 1 ENI/ENIW Identifier

[email protected]

(3)

248

Save/Reset

(4)

Integer 1 0 = save configuration to flash

1 = simple reset

2 = reset to out-of-box

defaults

3 = reset to out-of-box, except

maintain current IP

configuration

n/a

245 Configuration Security

Mask

(5)

Integers 4 Valid IP Address 000.000.000.000

244

SMTP Authentication

(5)

Integer 1 0 = Disabled

1 = Enabled

Disabled

243

SMTP Password

(5)

ASCII String 1 64 character password null

242

SMTP Username

(5)

ASCII String 1 64 character username null

241

Ethernet Speed/Duplex

(5)

Integer 1 0 = Auto Negotiate

1 = 10 Mbps half-duplex

2 = 10 Mbps full-duplex

3 = 100 Mbps half-duplex

4 = 100 Mbps full-duplex

10 Mbps half-duplex (series A, B)

Auto Negotiate (series C, D)

(1) Changes to the Baud Rate take effect when the ENI/ENIW power is cycled, or the configuration is saved to flash.

(2) Series C and higher.

(3) The ENI/ENIW address, 192.168.1.254 will be replaced by the IP address assigned to the ENI/ENIW. For example, the string may be ENI191.225.181.52@eni1761.org. If

the ENI/ENIW does not have an assigned IP address, the string will be read as ENI192.168.1.254@eni1761.org for the series D or [email protected] for series A, B,

or C.

(4) See page 4-19 for more information on Save/Reset.

(5) Series D only.

Table 4.1 Configuration Node Functions

Node Function Data Type Number of

Elements

Options Default

CAT FRN

1761-NET-ENI 2.20

SER

EXTERNAL POWER REQUIREMENTS

24 V dc +10/-15% AT 100 mA

N.E.C. CLASS 2

USE EXTERNAL DC SOURCE

FOR CLASS I DIVISION 2

APPLICATIONS. SEE

INSTALLATION INSTRUCTIONS

24VDC

CHS

GND

NEUT

MADE IN U.S.A.

ETHERNET ADDRESS

CUS

LISTED IND.CONT.EQ. FOR HAZ.

LOC. A196

OPERATING TEMPERATURE CODE T3C

ETHERNET

INTERFACE

CLASS I, GROUPS A,B,C, AND D, DIV 2

N223

EN I*B22001020001 FAC . xx

FF-FF-FF-FF-FF-FF

Hardware

Address

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 143 144

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Uživatelský manuál Strana 53

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI)