Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Uživatelský manuál stáhnout pdf (Strana 73)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 71

Chapter 6

System Updates

Overview

The HMI Interface Board can be updated over a network. In doing so, only

certain files and directories can be written to.

These updates are completed using either an FTP Client such as Microsoft

Windows Explorer or a supplied utility from Rockwell Automation.

Chapter Objectives

This chapter describes how the HMI Interface Board updates files and firmware

in the PowerFlex 7000 Medium Voltage Drive. In this chapter, you will learn how

to:

• Update drive firmware and language modules using an FTP Client such as

Microsoft Windows Explorer™.

• Update the entire drive system including the SD Card contents using a

utility which aids in the update process and is superior to using the FTP

Client.

Using an FTP Client to

Update Firmware

Drive Firmware

An FTP Client updates the drive firmware by copying an .FFW file used for drive

firmware or drive language modules to the ‘/Drive/Config’ directory on the

HMI Interface Board module. (see Drive Directory

on page 68)

The .FFW files can only be copied to the drive when the drive is in download

mode (see Place the Drive into Download Mode

on page 61).

After copying an .FFW file to the drive’s configuration directory, the drive

automatically resets. To download an additional module, the drive will again have

to be placed into download mode.

ATTENTION: Read this section before attempting to perform firmware updates

using an FTP Client as it provides necessary background information.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 89 90

Žádné komentáře

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Uživatelský manuál Strana 73