Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Uživatelský manuál stáhnout pdf (Strana 69)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 67

Chapter 5

Windows Explorer

Overview

This section demonstrates the use of Windows Explorer™ as it is available on

every Windows based PC. However, other FTP clients however are equally

usable.

Chapter Objectives

This chapter describes how the HMI Interface Board transfers files between the

PC/Terminal and the PowerFlex 7000 Medium Voltage Drive. In this chapter,

you will learn how to:

• Copy and open files directly from the drive.

• Use Windows Explorer to access the drive.

Windows Explorer Tutorial

This section demonstrates the capability of using Windows Explorer with the

HMI Interface Board module.

To open Windows Explorer:

1. Right-click the Start button in Windows.

2. Click Open Windows Explorer.

3. Enter

ftp://ip.ip.ip.ip in the address bar, where ip.ip.ip.ip is the IP address of

the HMI Interface Board module.

Alternatively, Windows Explorer can also be launched from the menu

within the Forge Shell application (see Drive Menu

on page 24).

The root directory (Figure 69

) shows the revision level of the PowerFlex HMI

Interface Board firmware. In this example, it is 1.008D.

There are also three sub-directories:

• Local – for System use only.

• Drive – files which are available from the drive

• Card – files which are stored on the SD Card

Figure 69 - Root Directory

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 89 90

Žádné komentáře

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Uživatelský manuál Strana 69