Rockwell-automation 2707-NP DTAM Programming Software Uživatelský manuál Strana 77
- Strana / 184
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Chapter 8
Creating Data Entry Screens
8–9
32 Bit Floating Point
Important: 32 bit floating point is an option on a DTAM Plus with PLC-5
DF1, DH485, or RIO protocol selected.
See Appendix D for DTAM Micro Floating Point format.
The screen for a 32 Bit Floating Point format is shown below.
Format Selection Description
Register Number The PLC address to be monitored.
Minimum Register Value The minimum data value of the controller address being monitored.
Maximum Register Value The maximum data value of the controller address being monitored.
Minimum Entry Value The minimum data value to be entered. When this value is
entered the minimum register value is entered to the defined
controller address.
Maximum Entry Value The maximum data value to be entered. When this value is entered
the maximum register value is entered to the defined controller
address. The range defined by the minimum entry value and the
maximum entry value is proportionally scaled to the range of the
minimum and maximum register values. If both ranges are equal
then the scaling ratio is 1:1.
Low User Input Limit The minimum entry value that an operator may enter. This value
must be within the range of the data format selected. If a value lower
than this is entered, the DTAM will display an “Input Error” screen
displaying the minimum and maximum entry limits.
High User Input Limit The maximum entry value that an operator may enter. This value
must be within the range of the data format selected. If a value
higher than this is entered, the DTAM will display an “Input Error”
screen displaying the minimum and maximum entry limits.
Default Value This parameter defines a default value that is displayed at the
entry address of the display. An entry of Z defines no default.
NONE appears in the window when Z is entered.
Data Entry Register
Format Selections
- Programming 1
- Important User Information 2
- Chapter 1 3
- Chapter 3 3
- Chapter 4 3
- Chapter 5 4
- Chapter 6 4
- Chapter 7 4
- Chapter 8 4
- Chapter 9 5
- Chapter 10 5
- Chapter 11 5
- Chapter 15 6
- Chapter 16 6
- User Manual 7
- Table of Contents 7
- Using this Manual 9
- Intended Audience 10
- Conventions 11
- Related Publications 12
- Installing / Running 13
- DTAM Programming Software 13
- Chapter 2 14
- Installing DTAM 15
- Programming Software 15
- Running DPS 18
- The Opening Menu appears: 19
- Menu Conventions 21
- Screen Building 22
- Cursor Status Line 23
- Moving Around Screens 23
- Linking Application Screens 23
- Designing DTAM Plus and 25
- DTAM Micro Applications 25
- DTAM Plus / 26
- DTAM Micro Comparison 26
- DTAM Micro File Types 27
- Screen Types and 28
- SLC Data Formats 29
- Data Scaling 30
- Application Example 32
- Example Application 33
- Description 33
- Designing an Application 34
- Creating or Editing 37
- Edit Application File 38
- Save Application File 40
- Using Screen Builder 43
- Accessing Screen Types 44
- Editing Screen Displays 46
- Copying Screens 47
- Selecting Other Screens 48
- Clearing Screens 49
- Inserting the 50
- Time or Date 50
- Exiting Screen Builder 51
- Creating Menu and 53
- Sub-Menu Screens 53
- Building a Menu 54
- Main Menu and 55
- Sub-Menu Screen Builder 55
- Menu Screen 56
- Creating Data Display Screens 57
- Data Display 58
- Screen Builder 58
- Creating a Display Screen 59
- Display Register 61
- Format Selections 61
- 32 Bit Floating Point 64
- 32 Bit HEX 66
- Creating Data Entry Screens 69
- Data Entry 70
- Creating a Data 71
- Entry Screen 71
- Data Entry Register 74
- Creating Security Screens 81
- Security 82
- Creating a Security Screen 83
- Creating Recipe Screens 85
- Recipe Screen 87
- Creating Bar Graph Screens 89
- Bar Graph 90
- Graph Display Range 91
- Creating a Bar Graph Screen 92
- Display Data 93
- Bar Graph Register 94
- Linking Menu Screens 96
- Screen Linking 96
- Guidelines 96
- Application Screen 97
- Linking Function Keys 97
- Menu and Sub-Menu 97
- Linkage Display 97
- Linking a Menu 98
- Linking Example 99
- Chapter 12 100
- Creating Alarm Screens 101
- Chapter 13 102
- Alarm Screen 103
- Creating an Alarm Screen 104
- 16 Bit Binary Data 106
- Configuration Parameters 107
- Chapter Objectives 107
- Accessing Configuration Data 108
- Update Interval 109
- DTAM Advisor 110
- Advisor Operation 111
- Time Synchronization 112
- Setting Master 114
- Security Code 114
- Special Security Screen 115
- Printer Port Parameters 116
- SLC Hardware Parameters 117
- SLC 500 Slot Configuration 119
- Max Node Address 119
- Advisor Update Rate 121
- PLC Hardware Parameters 122
- Chapter 14 123
- Current Settings 124
- Discrete I/O 125
- BT Data File 125
- Supported File Types 126
- DTAM Plus Background Monitor 127
- Background Monitor Screen 128
- Creating a 129
- Background Monitor 129
- 16 Bit Integer Shown 130
- Register Selections 131
- Integer or BCD Selections 132
- DTAM Micro 133
- Function Key Builder 133
- Function Key Options 134
- Bit Write Mode 134
- Linking Screens to 136
- Function Keys 136
- Assigning 137
- Bit Write Functions 137
- DTAM Plus 139
- Printer Form Builder 139
- Print Form Builder 140
- Creating a Printer Form 141
- Chapter 17 142
- Print Forms 16 Bit Binary 144
- ASCII Input 145
- Allen-Bradley Bar 145
- Code Message Formats 145
- Creating an ASCII 146
- Entry Display 146
- Entering Data with a 147
- Bar Code Scanner 147
- Downloading 150
- Chapter 19 151
- Uploading 154
- Printing Application Files 157
- Upgrading the 159
- Operating System 159
- Chapter 20 160
- ASCII Character Set 161
- Appendix A 162
- ASCII Display Character Set 162
- Table A.1 162
- ASCII Display Character Set* 162
- Appendix A 163
- DTAM Application Worksheet 165
- DTAM Plus Screen Worksheet 166
- PLC-5 Mnemonics in DPS 167
- Data Formats 171
- Bit Format 172
- 16 Bit Signed Integer 172
- 16 Bit Unsigned Integer 173
- 16 Bit BCD 173
- 16 Bit HEX (Hexadecimal) 173
- 32 Bit Unsigned Integer 174
- 32 Bit HEX (Hexadecimal) 174
- Floating Point Numbers 175
- Display Width 176
- Appendix D 178
- ASCII Data Field 178
Související produkty a manuály pro Zařízení Rockwell-automation 2707-NP DTAM Programming Software
Zařízení Rockwell-automation 4100 ESRS Encoder Signal Reference Simulator Insta Uživatelský manuál
(37 stránky)
(37 stránky)
Zařízení Rockwell-automation 9528-APPOWSENE Virtual Image Templates User Manual Uživatelský manuál
(120 stránky)
(120 stránky)
Zařízení Rockwell-automation 1798-DFTP2 FlexArmor DeviceNet Field Termination P Uživatelský manuál
(8 stránky)
(8 stránky)
Zařízení Rockwell-automation 2090 Ultra3000 Servo Drives Integration Manual Uživatelský manuál
(180 stránky)
(180 stránky)
Zařízení Rockwell-automation 6181F_P Series E Integrated Display Computers Inst Uživatelský manuál
(24 stránky)
(24 stránky)
Zařízení Rockwell-automation 6155R 200R VersaView Industrial Non-display Comput Uživatelský manuál
(24 stránky)
(24 stránky)
Zařízení Rockwell-automation 9904-RPFM ControlNet Modular Repeater Medium-dista Uživatelský manuál
(16 stránky)
(16 stránky)
Zařízení Rockwell-automation 2711 PANELBUILDER SOFTWARE USER MANUAL Uživatelský manuál
(468 stránky)
(468 stránky)
Zařízení Rockwell-automation 2727-T7P30D1F MobileView Tablet T750 User Manual Uživatelský manuál
(104 stránky)
(104 stránky)
Zařízení Rockwell-automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Uživatelský manuál
(495 stránky)
(495 stránky)
Zařízení Rockwell-automation Atlas 5-GD2 Heavy Duty Guard Locking Interlock Saf Uživatelský manuál
(4 stránky)
(4 stránky)
Zařízení Rockwell-automation 2198-Hxxx Kinetix 5500 Servo Drives Installation I Uživatelský manuál
(20 stránky)
(20 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce