Rockwell-automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS Uživatelský manuál stáhnout pdf (Strana 16)

16 Rockwell Automation Publication 1788-UM058B-EN-P - September 2014

Chapter 1 Installation

We re co mmend a 2 4…32V DC power supply for the linking device to operate

correctly. No additional power supplies or power conditioners are required. The

power supply connection is described here. Tighten DC Power connections to a

torque of 0.22…0.25Nm (2…2.2 lb-in).

PA Network Connections

The PA network must be connected via the PA

terminal on the linking device. The PA network

connection and pin-out is described here.

Make PA network connections to a torque of

0.5…0.6 Nm (4.4…5.3 lb-in)

The PA segment is split between two physical ports,

A and B.

IMPORTANT

Do not use extra power supplies or power conditioners with the 1788-EN2PAR

and 1788-CN2PAR linking devices.

Pin Description

Right/Top (red) PA +

Middle (green) PA -

Left/Bottom Shield

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Žádné komentáře

Rockwell-automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS Uživatelský manuál Strana 16