Rockwell-automation 1784-KTS_KTX_KTXD User Manual Communication Interf Uživatelský manuál stáhnout pdf (Strana 32)

3-4 Install the Card Inside the Computer

1784-6.5.22 - November 1999

E3 Jumper Sets Operating Mode

The E3 jumper sets the card to 8- or 16-bit mode.

Important: You must place the card in a 16-slot connector regardless of the

chosen mode of operation. Eight-bit mode is included only as a

fall-back in case of system issues with 16-bit operation; you should

run the card in 16-bit mode.

To set this mode: Jumper these pins:

16-bit* pins 2 and 3, the two left-most pins

8-bit pins 1 and 2, the two right-most pins

*Shipped from the factory in default 16-bit mode

30142

Channel 2

SW1 SW2

Channel 1

SW3 SW4

INTERRUPTS

CH2 CH1

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 95 96

Žádné komentáře

Rockwell-automation 1784-KTS_KTX_KTXD User Manual Communication Interf Uživatelský manuál Strana 32