Rockwell-automation SD3000 Drive Configuration, Programming Uživatelský manuál stáhnout pdf (Strana 55)

205/1205 Interlock Register (Continued)

Bit: 7

Hex Value: 0080H

Sug. Var. Name:

WCI_MCR@

Range:

N/A

Access:

Read Only

UDC Error Code:

N/A

LED:

N/A

Description: The M-Contactor Not Closed bit is set if the M-Contactor did not close at the expected

time.

Bit: 8

Hex Value:

01 OOH

Sug. Var. Name:

WFI_ILL@

Range:

N/A

Access: Read

Only

UDC Error Code:

N/A

LED:

N/A

Description: The More Than One Field Request bit is set when more than one incompatible Field

operating mode is requested at a time in register 100/1 100. The following operating modes are mutu-

ally exclusive:

l Field Alpha Test

l Field Identification Test

l Field Run

This bit is also set if you have attempted to restart the drive without resetting the appropriate com-

mand bits from register 100/1 100. Recall that the bits in register 100/1 100 are edge-sensitive. See

Appendix G for additional information.

Bit: 9

Hex Value: 0200H

Sug. Var. Name:

WFI_CNF@

Range:

N/A

Access:

Read Only

UDC Error Code:

N/A

LED:

N/A

Description: The Field Parameters Are Not Loaded bit is set if the field configuration parameters

have not been downloaded into the UDC module from the Programming Executive.

Bit:

Hex Value: 0400H

Sug. Var. Name:

WFI_GAN@

Range:

N/A

Access:

Read Only

UDC Error Code:

N/A

LED:

N/A

Description: The Field Gains Not Loaded bit is set if field gains are zero, i.e., have not been auto-

tuned for or a UDC task containing the pre-defined gain variables has not been loaded.

Bit:

Hex Value: 0800H

Sug. Var. Name:

WFI_FLT@

Range:

N/A

Access:

Read Only

UDC Error Code:

N/A

LED:

N/A

Description: The Field Faults Need to be Reset bit is set if previous field faults (register 202/1202),

i.e., field loss and line synchronization loss faults, have not been cleared.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 117 118

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation SD3000 Drive Configuration, Programming Uživatelský manuál Strana 55

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation SD3000 Drive Configuration, Programming