Rockwell-automation 57RF RFID ICODE Handheld Interface User Manual Uživatelský manuál stáhnout pdf (Strana 75)

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011 75

Chapter 7

Navigation

There are multiple ways to navigate inside the RFID software. Tap on any text

field (such as Start, Length, or UID) using the stylus to edit it. Double-tap a text

field to highlight the text. Use the scroll bar to view the contents of the data grid.

Additionally, users can tap anywhere within the data grid and use the arrow keys

to move up, down, left, and right within the grid.

Figure 35 - Arrow Keys, 52-Key Keypad

Figure 36 - Arrow Key, 45-Key Keypad

Working with Tags

Read/Write Times

Refer to the following table for tag read/write times:

Reading Tags

Single Tag Read to Screen

Deselect the check box marked Continuous for single tag read. Specify the start

byte and the length of data you want to read. Enter a length of “0” to read the

entire tag. Select the data mode or radix (binary, decimal, hexadecimal, or ASCII)

using the drop-down menu. Position the tag and push the Read button.

Tag Type User Memory Read Time Write Time

SLI 128 112 Bytes 0.254 s 0.59 s

SLI-S 256 160 Bytes 1.27 s 2.95 s

SLI-L 64 32 Bytes 0.47 s 0.95 s

FRAM 2K 2000 Bytes 6 s 11 s

IMPORTANT

Start and Length values must be in increments of 4 or 8 bytes, depending

on block size.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 111 112

Žádné komentáře

Rockwell-automation 57RF RFID ICODE Handheld Interface User Manual Uživatelský manuál Strana 75