Rockwell-automation 2711P Creating Modbus Applications Uživatelský manuál stáhnout pdf (Strana 51)

Publication 2711P-UM002B-EN-P - March 2007

Installing KEPServer Drivers on Terminal 51

13. On touch or touch/screen terminals, you must calibrate the

touch screen by selecting pointers in all four corners of the

screen and pressing the middle of the screen when prompted.

14. Ignore the following message if it appears. It means RSView ME

is being installed. Do not touch the two buttons that appear with

the message.

Machine edition may be corrupted. Do you want to download

firmware?

15. Communication settings are cleared when the terminal is

upgraded. If Ethernet communications is used, reconfigure the

Ethernet communication settings using the values recorded

when preparing the terminal.

16. Replace the .MER files that you backed up before starting the

upgrade or download the new .MER files to the terminal.

17. Load the .MER file and run the project.

TIP

You can configure your application to start automatically

on power cycle under Startup Options.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 91 92

Žádné komentáře

Rockwell-automation 2711P Creating Modbus Applications Uživatelský manuál Strana 51