Rockwell-automation 20P PowerFlex DC Drive - Frame C Transient Noise F Uživatelský manuál stáhnout pdf (Strana 8)

8 PowerFlex® DC Drive - Frame C Transient Noise Filter Circuit Board

9. Remove the wires from the Transient Noise Filter board that are

connected to the back of the control terminal blocks on the Power

Supply Filter board.

10. Remove the two screws that secure the top of the Power Supply Filter

board and carefully lift the board up and away from the W phase power

terminal.

11. Temporarily raise and secure the EMI Shield and Control board and

remove the screws that secure the black leads from connections V and

W on the Transient Noise Filter board to power terminals V and W,

respectively, and remove the leads.

Remove wires

Remove screw

Remove screws and leads

Note: Drive shown with

Transient Noise Filter

board and Power Supply

Filter board still secured

1 2 3 4 5 6 7 8 9 10

Žádné komentáře

Rockwell-automation 20P PowerFlex DC Drive - Frame C Transient Noise F Uživatelský manuál Strana 8