Rockwell-automation 20-750-DNET PowerFlex DeviceNet Option Module Uživatelský manuál Strana 83
- Strana / 144
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Rockwell Automation Publication 750COM-UM002B-EN-P - October 2012 83
Troubleshooting Chapter 7
NET A Status Indicator
This red/green bicolor LED indicates the status of the network connection as
shown in the table below.
Status Cause Corrective Actions
Off The option module or network is not powered.
The option module is not properly connected to
the network.
• Securely connect and ground the option module to the drive by fully
inserting it into the drive port and tightening its two captive screws to the
recommended torque.
• Correctly connect the DeviceNet cable to the option module’s DeviceNet
plug.
• Apply power to the drive.
• Verify that the DeviceNet network is powered.
Steady Red The option module failed the duplicate node
address detection test or bus off.
The node address switch setting is not valid.
• Configure the option module to use a unique node address on the
DeviceNet network.
• Configure the option module to use the correct network data rate.
• Verify that the network has correct media installed.
• Verify that the node address switch setting is between 0 and 63.
Flashing Red A DeviceNet I/O connection has timed out. • Place the scanner in RUN mode, or apply power to the peer device that will
send I/O.
• Check the amount of traffic on the network.
Flashing Red/
Green
The option module has received an Identify Comm
Fault request.
Wait for the faulted node recovery to complete.
Flashing Green The option module is properly connected, but is
not communicating with any devices on the
network.
• Place the controller in RUN mode.
• Program a controller to recognize and transmit I/O or make a messaging
connection to the option module.
• Configure the option module for the program in the controller.
Steady Green The option module is properly connected and is
communicating on the network.
No action required.
- User Manual 1
- Important User Information 2
- Summary of Changes 3
- New and Updated 3
- Information 3
- Table of Contents 5
- Conventions Used in This 9
- Rockwell Automation 9
- Additional Resources 10
- Getting Started 11
- Features 12
- Understanding Parameter 13
- Compatible Products 13
- Required Equipment 13
- User-Supplied Equipment 14
- Safety Precautions 15
- Quick Start 16
- Installing the Option Module 17
- Setting the Node Address 18
- Switches 18
- Setting the Data Rate Switch 19
- Connecting the Option 19
- Module to the Drive 19
- Module to the Network 20
- Start-Up Status Indications 21
- Commissioning the Option 24
- Configuring the Option Module 25
- Edit Net Addr Cfg 26
- Autobaud 3 27
- 0<<16 28
- Edit DLs To Net Cfg 29
- Value Description 30
- 1 Use this logic bit 30
- Changing the Fault Action 31
- Resetting the Option Module 32
- 0<<2 32
- Host Drive 33
- 240V 4.2A 33
- Rev 3.002 Ser. A 33
- Viewing the Option Module 34
- Status Using Parameters 34
- Updating the Option Module 35
- Firmware 35
- Configuring the I/O 37
- ControlLogix Controller 38
- Configuring the I/O Chapter 4 39
- I/O to the Scanner 41
- Chapter 4 Configuring the I/O 42
- Using the I/O 53
- Understanding the 54
- ControlLogix Controller I/O 54
- Using Logic Command/Status 54
- Using Reference/Feedback 55
- Using Datalinks 56
- Example Ladder Logic 57
- Program Information 57
- Program 59
- Status/Feedback 61
- Logic Command/Reference 61
- Generic Profile 62
- Using the I/O Chapter 5 63
- Chapter 5 Using the I/O 64
- Using Explicit Messaging 65
- About Explicit Messaging 66
- Examples 68
- Single Parameter 70
- Multiple Parameters 72
- Request (Source Data) array 79
- Troubleshooting 81
- PORT Status Indicator 82
- MOD Status Indicator 82
- NET A Status Indicator 83
- Viewing Option Module 84
- Diagnostic Items 84
- Viewing and Clearing Events 86
- Specifications 89
- Environmental 90
- Regulatory Compliance 90
- Option Module Parameters 91
- About Parameter Numbers 92
- How Parameters Are 92
- Organized 92
- Device Parameters 92
- Host Parameters 94
- DeviceNet Objects 99
- Identity Object 100
- Connection Object 101
- Register Object 102
- PCCC Object 103
- N-Files 105
- DPI Device Object 106
- Class Attributes 107
- Instance Attributes 108
- DPI Parameter Object 109
- Formula number 111
- Extended DPI descriptor 111
- Descriptor Attributes 112
- Formulas for Converting 114
- Common Services 114
- Object Specific Services 114
- DPI Fault Object 115
- DPI Alarm Object 117
- DPI Diagnostic Object 119
- DPI Time Object 121
- Host DPI Parameter Object 123
- 750-Series Drives 129
- History of Changes 131
- Appendix E History of Changes 132
- Glossary 133
- Rockwell Automation Support 144
- Documentation Feedback 144
Související produkty a manuály pro Zařízení Rockwell-automation 20-750-DNET PowerFlex DeviceNet Option Module
Zařízení Rockwell-automation 445L GuardShield Safe 4 and Safe 4 PAC Safety Ligh Uživatelský manuál
(40 stránky)
(40 stránky)
Zařízení Rockwell-automation 160 Supplement-160-NX3 Chassis Mount Series C Uživatelský manuál
(12 stránky)
(12 stránky)
Zařízení Rockwell-automation 140U Q, M frame CB Electronic RMS Trip Unit instal Uživatelský manuál
(14 stránky)
(14 stránky)
Zařízení Rockwell-automation 440N SensaGuard Magnetically Coded NonContact Swit Uživatelský manuál
(12 stránky)
(12 stránky)
Zařízení Rockwell-automation 193-ERR E1 PLUS Remote Reset Accessory Module Uživatelský manuál
(6 stránky)
(6 stránky)
Zařízení Rockwell-automation 193- E3 User Manual Instruction Sheet for High Fau Uživatelský manuál
(1 stránky)
(1 stránky)
Zařízení Rockwell-automation 193-EPB_EPD_EPE Overload Relay Panel or DIN Rail A Uživatelský manuál
(4 stránky)
(4 stránky)
Zařízení Rockwell-automation 700-RTC_RTCR Type RTC RTCR Solid-State Relays Uživatelský manuál
(8 stránky)
(8 stránky)
Zařízení Rockwell-automation 160 Series C Frn 7.xx Quick Reference Card Uživatelský manuál
(4 stránky)
(4 stránky)
Zařízení Rockwell-automation 20-750-CNETC PowerFlex Coaxial ControlNet Option M Uživatelský manuál
(150 stránky)
(150 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.115 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce