Rockwell-automation 1799ER-IQ10XOQ10 Dual-Port EtherNet Embedded I/O B Uživatelský manuál stáhnout pdf (Strana 16)

16 Dual-Port EtherNet Embedded I/O Board with 10 Inputs/ 10 Outputs

Publication 1799ER-IN001B-EN-P - May 2013

Specifications

5 Group 0 Input OFF_ON Delay Filter (High Byte)

6 Group 0 Input ON_OFF Delay Filter (Low Byte)

7 Group 0 Input ON_OFF Delay Filter (High Byte)

8 Reserved IV_G0 IA_G0 FV_G0 FA_G0

9 Reserved (pad)

CRN = Configuration Revision Number. Value is 0 after power-on reset and after completely closing the

connection. Value is 1 when the module is configured. Once a module is configured, the only way to

change its configuration is to close the connections to it or use the override value of 0.

FA_Gx = Fault Action Group x. 0 = Apply Fault Value, 1 = Hold Last State

IA_Gx = Idle Action Group x. 0 = Apply Idle Value, 1 = Hold Last State

FV_Gx = Fault Value Group x. 0= Off, 1=On

IV_Gx = Idle Value Group x. 0= Off, 1=On

Input Filter values = 0, 1000, 2000, 4000, 8000, or 16000 microseconds.

Input

Attribute Value

Inputs per block 10 sinking or sourcing, Type 1 + compatible

Off-state voltage 5V DC max

Off-state current 1.5 mA max

On-state voltage 10...30V DC

On-state current 2...11 mA

Output

Attribute Value

Outputs per block 10 sinking or sourcing, 0.5A, short circuit protected, pilot duty

Output auxiliary voltage 10...30V DC

On-state voltage drop 250 mV max

Instance 102 - Configuration Input / Output

Config Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

1 2 ... 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

Rockwell-automation 1799ER-IQ10XOQ10 Dual-Port EtherNet Embedded I/O B Uživatelský manuál Strana 16