Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. Uživatelský manuál stáhnout pdf (Strana 11)

ControlNet Communication Interface Card 11

Publication

1784-5.33 – September 1997

orksheet E

Your

base I/O space address

Record the base I/O space address for the KTCX15 card:

Card:

Slot number:

Using default address:

If no, new I/O space address:

yes no

up (1)

down (0)

1234

Setting the Card’s Switches

ATTENTION:

When setting the switches, be sure to avoid touching

other components on the card.

1. Follow the card handling instructions on page 4.

2. Remove the card from the anti-static clamshell.

Important: When selecting configuration settings, check for conflicts with

other interface cards and system memory. If there is a conflict,

the host computer will not operate properly.

You must find a way to disable caching and shadow memory for at least the 16K

of memory space occupied by each card. This can usually be accomplished

through your CMOS setup program and/or memory manager

, and must be done

before running applications with the KTCX15 cards.

26 ControlNet Communication Interface Card

Publication

1784-5.33 – September 1997

Figure 5

Connecting

a portable host computer to a ControlNet network through

a programmable controller or an I/O adapter

ControlNet

product

BATT

CH 0

programming terminal

BATT

CH 0

1786-CP

➀

ControlNet network

1784-KTCX15

➀

The

1786-CP cable can be plugged into any ControlNet product’

s NAP to provide

programming capability on the ControlNet network. A programming terminal connected

through this cable is counted as a node and must have a unique address.

ATTENTION:

If you connect the product to a cable system that does

not support redundant media, connect the tap dropline to the BNC

connector labeled channel A. Channel B is left open.

If the cable system is redundant, connect the product such that all

devices on the network use the same cable for the same channel.

That is, all channel A connectors connect to one cable; all channel B

connectors connect to the other.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. Uživatelský manuál Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM.