Rockwell-automation 1771-OQ16/C Isolated Output Module Installation In Uživatelský manuál stáhnout pdf (Strana 14)

DC (24V) Isolated Output Module14

Publication 1771ĆIN057B-EN-P - November 2002

Conducted RF Immunity IEC 61000-4-6

10V rms with 1kHz sine wave 80% AM from 150kHz to 30MHz

Emissions CISPR 11

Group 1, Class A (with appropriate enclosure)

Enclosure Type Rating None (open-style)

Keying Between 22 and 24

Between 32 and 34

Fuse 3A 2AG Fast Acting fuses (1 per output) Littelfuse P/N 225003

(Optional fuse kit Cat No. 1771ĆFF contains 5 fuses)

Field Wiring Arm Catalog Number 1771ĆWN

Wiring Arm Screw Torque 7-9 pound-inches (0.8-1.0Nm)

Certifications

(when product is marked)

UL UL Listed Industrial Control Equipment

CSA CSA Certified Process Control Equipment

CSA CSA Certified Process Control Equipment for Class I,

Division 2 Group A, B, C, D Hazardous Locations

European Union 89/336/EEC EMC Directive,

compliant with:

EN 50082-2, Industrial Immunity

EN 61236, Meas./Control/Lab., Industrial Requirements

EN 61000-6-2, Industrial Immunity

EN 61000-6-4, Industrial Emissions

C-Tick

Australian Radiocommunications Act, compliant with:

AS/NZS 2064, Industrial Emissions

One or two 14-22 AWG solid or stranded copper wires per terminal. Must be same size. Do not intermix solid and stranded wires.

Use copper wire only.

14AWG connected to all terminals may not allow the field wiring arm cover to close. A smaller wire size may be required.

You use this conductor category information for planning conductor routing as described in publication 1770Ć4.1, Industrial

Automation Wiring and Grounding Guidelines.

See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and other certification details

1 2 ... 9 10 11 12 13 14 15 16

Žádné komentáře

Rockwell-automation 1771-OQ16/C Isolated Output Module Installation In Uživatelský manuál Strana 14