Rockwell-automation 1771-IR INSTL.INSTR RTD INPUT MODULE Uživatelský manuál Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
RTD Input Module 11
Publication
1771-5.50 – October 1996
Description Value
Number of Inputs 6 RTD input channels
Module Location 1771 I/O Chassis
Sensor Type 100 ohm platinum (alpha = 0.00385) or 10 ohm copper
(alpha = 0.00386)
Other types may be used with report in ohms only
Units of measure Temperature in
o
C
Temperature in
o
F
RTD resistance in ohms (10milliohms or 30milliohms
resolution)
Temperature Range Platinum: –200 to +870
o
C (–328 to 1598
o
F)
Copper: –200 to +260
o
C (–328 to +500
o
F)
Resistance Range 1.00 to 600.00 ohms
Resolution Platinum: 0.1
o
C (0.1
o
F)
Copper: 0.3
o
C (0.5
o
F)
Sensor Excitation 1mA constant current source supplied by module
Common Mode Rejection 120db @ 60Hz up to 1000V peak
Common Mode Impedance Greater than 10 megohms
Normal Mode Rejection 60db @ 60Hz
Input Overvoltage Protection 120V rms continuous
Open RTD Response Time Open excitation (terminal A) to overrange: <0.5sec
Open common (terminal C) to underrange: <0.5sec
Open sense (terminal B): drift high
Scan Time 50ms for 6 channels
Isolation Voltage This isolation meets or exceeds the requirements of UL
Standard 508, and CSA Standard C22.2 No. 142.
Backplane Current 950mA at 5V
Power Dissipation 4.75W maximum
Thermal Dissipation 16.2 BTU/hr
Environmental Conditions
Operating Temperature:
Rate of Change:
Storage Temperature:
Relative Humidity: Operating
Storage
0 to 60
o
C (32 to 140
o
F)
Ambient changes greater than 1.0
o
C/minute may temporarily
degrade performance during periods of change.
–40 to 85
o
C (–40 to 185
o
F)
5 to 95% noncondensing
5 to 95% noncondensing
Keying Between 10 and 12
Between 28 and 30
Field Wiring Arm Cat. No. 1771-WF
Wiring Arm Screw Torque 7-9 inch-pounds
Specifications continued on next page
Specifications
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře