Rockwell-automation 1734-OB2_OB4_OB8, Series C POINT I/O Output Module Uživatelský manuál stáhnout pdf (Strana 10)

10 POINT I/O Output Module

Publication 1734-IN018C-EN-E - April 2013

Remove a Mounting Base

To remove a mounting base, you must remove any installed module and the module

installed in the base to the right. Remove the Removable Terminal Block, if wired.

1. Unlatch the RTB handle on the I/O module.

2. Pull on the RTB handle to remove the Removable Terminal Block.

3. Press on the module lock on the top of the module.

4. Pull on the I/O module to remove from the base.

5. Repeat steps 1, 2, 3 and 4 for the module to the right.

6. Use a small bladed screwdriver to rotate the orange base locking screw to a vertical

position. This releases the locking mechanism.

7. Lift straight up to remove.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Žádné komentáře

Rockwell-automation 1734-OB2_OB4_OB8, Series C POINT I/O Output Module Uživatelský manuál Strana 10