Rockwell-automation 1609-ENET Ethernet Network Card Quick Start Uživatelský manuál stáhnout pdf (Strana 9)

Rockwell Automation Publication 1609-QS002A-EN-P - May 2014 9

Web Mode Setup Chapter 2

5. Use the PING utility to check the connection between your PC and the ENET card. From Windows, launch the

Command Prompt and enter ping 192.168.1.100. You should receive replies. Note: Make sure your computer is on

the same network as the UPS with a static IP address.

6. Launch your web browser.

7. Type the 1609-ENET IP address “192.168.1.100” in the address bar and press enter.

8. Type the username and password. “Username: admin / Password: password”

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Žádné komentáře

Rockwell-automation 1609-ENET Ethernet Network Card Quick Start Uživatelský manuál Strana 9