Rockwell-automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base Uživatelský manuál stáhnout pdf (Strana 16)

16 XM-947 Dynamic Vibration Terminal Base

Publication GMSI10-IN027A-EN-P - May 2010

13 Signal Common 39 Reserved

14 Signal Common 40 No Connection

15 Chassis 41 Chassis

16 No Connection 42 Chassis

17 No Connection 43 Chassis

18 No Connection 44 CAN_High (white wire)

19 Channel 1 Signal In 45 CAN_Low (blue wire)

20 Channel 1 Buffer Out 46 CAN Shield (bare wire)

21 Channel 2 Signal In 47 DeviceNet V (+) (red wire) (Optional,

see IMPORTANT note below)

22 Channel 2 Buffer Out 48 DeviceNet V (-) (black wire)

23 Channel 3 Signal In 49 No Connection

24 Channel 3 Buffer Out 50 No Connection

25 Channel 4 Signal In 51 No Connection

IMPORTANT

The DeviceNet power circuit through the XM module interconnect, which is

rated at only 300mA, is not intended or designed to power DeviceNet loads.

Doing so could damage the module or terminal base.

To preclude this possibility, even unintentionally, it is recommended that

DeviceNet V+ be left unconnected.

No. Description No. Description

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Žádné komentáře

Rockwell-automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base Uživatelský manuál Strana 16