Rockwell Automation 22-WIM-N4S Uživatelský manuál stáhnout pdf (Strana 79)

Using RTU Master Mode D-5

4. Remove power from the drive to which the wireless connection has

been made. Then electrically connect all drives to create the RTU

Master network. Refer to System Wiring

on page D-6 for network

wiring details.

Using DriveExplorer

1. On the DriveExplorer WIM Linear List screen (Figure D.5),

double-click WIM Parameter 01 - [Adapter Cfg] and set its value

to “3 = RTU Master.”

Figure D.5 DriveExplorer WIM Linear List Screen

2. Remove power from the drive to which the wireless connection has

been made. Then electrically connect all drives to create the RTU

Master network. Refer to System Wiring on page D-6 for network

wiring details.

Using DriveExecutive

1. In the Value column of the DriveExecutive WIM Linear List screen

(Figure D.6), click on the WIM Parameter 01 - [Adapter Cfg]

pull-down list and set its value to “3 = RTU Master.”

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 99 100

Žádné komentáře

Rockwell Automation 22-WIM-N4S Uživatelský manuál Strana 79