Rockwell-automation T8082 Trusted Toolset Suite Uživatelský manuál stáhnout pdf (Strana 41)

Trusted

Toolset Suite T8082

Issue 14 Feb 10 PD-T8082 41

Once a Trusted

Expander Chassis has been connected, the Switch Config button on the Chassis

Connection window becomes active. Selecting this button will cause the Switch Configuration

window shown in Figure 27 below to be displayed.

Figure 27 Switch Configuration Window

This window shows the positions that the three DIP switches on the rear of the Expander Chassis

should be set in for Chassis 2. The first expansion chassis is always ID 2, the second ID 3 and so on.

If the switches are not set in the correct position, the Expander comms link will not function. Please

refer to product description PD-8300 Trusted

TMR Expander Chassis for DIP switch details.

All Expander Chassis must be ‘connected’ to the ‘master’ Trusted

Expander Interface Module as

described above. Confirmation that all chassis are connected may be obtained by placing the cursor

on the module in Slot 1 of the Controller Chassis and pressing the left-hand mouse button. This will

initiate the display shown in Figure 28 below.

Figure 28 Expander Interface Parameters Window

2.7. Trusted

TMR Communications Interface Module ( 8151 / 8151B )

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 81 82

Žádné komentáře

Rockwell-automation T8082 Trusted Toolset Suite Uživatelský manuál Strana 41