Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Uživatelský manuál stáhnout pdf (Strana 47)

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 47

Use a PowerFlex 40 Drive in an RSLogix 5000 Project Chapter 3

5. If your PowerFlex 40 drive has been previously used, reset it to factory defaults.

a. Click the Parameters tab.

b. From the Parameter 41, Reset To

Defalts pull-down menu, choose

Factory Rset for the current

value.

c. Click Apply.

The drive is reset and fault F048

is displayed and blinks.

d. Press to clear the fault.

6. From the Parameter 36, Start

Source pull-down menu, choose

Comm Port.

7. From the Parameter 38, Speed

Reference pull-down menu, choose

Comm Port.

8. Click Apply.

Changing these parameters switches the Start Source and Speed Reference parameters

control from the keypad to the communication port, giving you the ability to control these

functions from the RSLogix 5000 tags.

9. When prompted, click Yes.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54

Žádné komentáře

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Uživatelský manuál Strana 47