Rockwell-automation FactoryTalk Metrics User Guide Uživatelský manuál Strana 203

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 272
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 202
Analyzing FactoryTalk Metrics Data Chapter 5
The chart displays the OEE bar from bottom to top on the left
side of the OEE Box chart.
Now you will adjust the historical details that will be shown on
the OEE Box chart. There are several historical elements that
are shown by default in the chart, including Good Part Count,
Total Part Count, and Scrap Part Count. In your chart,
include also the Mean Time Between Failures (MTBF) and
Mean Time to Repair (MTTR).
3. In the Show the following Historical Data list, select the
Mean Time Between Failures and the Mean Time to Repair
check boxes.
The selected historical elements are added to the OEE Box
chart.
You can use a filter that will restrict the data displayed in the OEE
Box chart. For example, if you want to report on the OEE for all part
numbers produced for all shifts over the last 30 minutes, you will
need to create a custom filter
To create a filter:
Step 4: Create a Filter
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 203
Zobrazit stránku 202
1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 271 272

Komentáře k této Příručce

Žádné komentáře