Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Uživatelský manuál stáhnout pdf (Strana 42)

42 Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014

Chapter 4 Component Replacement

6. Remove the screw securing the slot cover of the selected PCI slot (E).

7. Pull out the slot cover (F) and store it.

8. Remove the add-in card from its protective packaging.

9. Slide the add-in card into the selected PCI slot (G).

Press to make sure it is firmly seated.

10. Secure the add-in card bracket to the chassis with its screw (H).

11. Connect any necessary cables to the add-in card.

12. Replace the center support and

expansion board hold-down

bars.

a. Align the center support (I)

and the hold-down bar (J)

against the chassis.

b. Secure each bar with four

screws (K).

IMPORTANT

Do not discard the slot cover. If the add-in card is removed in the

future, the slot cover must be reinstalled to maintain proper cooling.

H

G

E

F

J

K

I

K

K

K

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Komentáře k této Příručce

Žádné komentáře