Rockwell-automation 2707-MVH232_MVP232 MicroView Operator Interface Mo Uživatelský manuál stáhnout pdf (Strana 21)

Publication 2707-UM005AB-EN-P

Initial Setup and Mode Menu 3-5

Resetting the MicroView

Use the reset function to reset the MicroView after configuration changes using the

Mode Menu.

To reset the MicroView:

1. From the Mode Menu select [1] Reset.

You are prompted:

2. Press [1] on the keypad to initiate the reset.

The MicroView resets. This has the same effect as turning the

power off and on. The MicroView performs self diagnostic tests

and powerup displays as described in the Powerup Sequence.

Setting Communication

Parameters Manually

The communication function on the Mode Menu allows you to

manually set the baud rate of the communication port. Normally this

parameter is set automatically from the programming software when

an application is downloaded.

Select [2] Comm from the Mode Menu.

This menu displays:

Press [Prev] or [Next] to select a new rate: 300, 1200, 2400, 9600 or 19200.

Press [] to save the new Baud rate setting. The screen will display:

After the new parameter is saved, the MicroView will again display the Mode Menu

screen.

1 Reset

2 Comm

3 Spec

4 Other

1 = Reset

2 = Abort

1 Reset

2 Comm

3 Spec

4 Other

Baud Rate

“Next”

9600

Change

COPYING TO MEM

Please Wait . . .

1 Reset

2 Comm

3 Spec

4 Other

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 91 92

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 2707-MVH232_MVP232 MicroView Operator Interface Mo Uživatelský manuál Strana 21

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 2707-MVH232_MVP232 MicroView Operator Interface Mo