Rockwell-automation 22-COMM-E EtherNet/IP Adapter Uživatelský manuál stáhnout pdf (Strana 43)

Configuring the Scanner or Bridge 4-7

Figure 4.10 RSLogix 5000 - I/O Configuration Folder

After adding the scanner or bridge and the adapter to the I/O

configuration, you must download the configuration to the controller.

You should also save the configuration to a file on your computer.

1. Select Communications > Download. The Download dialog box

(Figure 4.11

) appears.

Figure 4.11 Download Dialog Box

2. Click Download to download the configuration to the controller.

When the download is completed successfully, RSLogix enters

online mode and the I/O OK box in the upper-left part of the screen

is green.

3. Select File > Save. If this is the first time that you saved the project,

the Save As dialog box appears. Navigate to a folder, type a file

name, and click Save to save the configuration to a file on your

computer.

Saving the Configuration

TIP: If a message box reports that RSLogix is unable to go

online, select Communications > Who Active to try to find

your controller in the Who Active dialog box. If it does not

appear, you need to add or configure the EtherNet/IP driver in

RSLinx. Refer to the RSLinx online help.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 165 166

Žádné komentáře

Rockwell-automation 22-COMM-E EtherNet/IP Adapter Uživatelský manuál Strana 43