Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Uživatelský manuál stáhnout pdf (Strana 50)

5-6 Troubleshooting

7–9 Reserved —

DSI Events

10 Slave Detected The adapter detected that the slave has been connected.

11 Slave Removed The adapter detected that the slave has been disconnected.

12 Slave Logon The adapter has established communications with the slave.

13 Slave Timeout The adapter has lost communications with the slave.

14 Slave Brand Flt The slave brand is different than the adapter.

15 Host 0 Logon The adapter has established communications with the drive.

16-19 Reserved —

20 Host 0 Timeout The adapter has lost communications with the drive.

21-24 Reserved —

25 Host 0 Brand Flt The drive is not an Allen-Bradley brand drive.

26–39 Reserved —

Network Events

40 Net Link Up The network link is established.

41 Net Link Down The network link is lost.

42 Dup Net Addr The adapter detected that another device is using its network

address. In this case, the adapter will not participate in any

network activity.

43 Net Open An I/O connection from the network to the adapter was opened.

44 Net Close An I/O connection from the network to the adapter was closed.

45 Net Timeout An I/O connection from the network to the adapter has timed

out.

46 Net Comm Flt The adapter has performed the “Comm Flt” action specified by

the user.

47 Net Idle Flt The adapter has performed the “Idle Flt” action specified by the

user.

48 PCCC IO Open The adapter has begun receiving PCCC Control messages (the

PCCC Control Timeout was previously set to a non-zero value).

49 PCCC IO Close The device sending PCCC Control messages to the adapter

has set the PCCC Control Timeout to a value of zero.

50 PCCC IO Time

Flt

The adapter has not received a PCCC Control message for

longer than the PCCC Control Timeout.

51 Net Sent Reset The adapter received a reset from the network.

52 Msg Ctrl Open The adapter has begun receiving Client-Server Control

messages (the Client-Server Control Timeout was previously

set to a non-zero value).

53 Msg Ctrl Close The device sending Client-Server Control messages to the

adapter has set the Client-Server Control Timeout to a value of

zero.

54 Msg Ctrl

Timeout

The adapter has not received a Client-Server Control message

for longer than the established timeout period.

Code Event Description

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Uživatelský manuál Strana 50

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter