Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Uživatelský manuál Strana 10

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 26
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 9
10 Rockwell Automation Publication 750-IN027C-EN-P - November 2013
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
2. Align the MCC column with the left transition section.
3. Bring the MCC column, transition section, and drive cabinet together.
4. Pass the 1/4-20 x 0.5 in. hex-head thread-forming screws from inside the
MCC column through the joining holes and engage the screws with the
holes in the transition section.
5. Pass the 1/4-20 x 1 in. screw from inside the MCC column through the
transition section joining hole
and secure with the 1/4-20 steel nut.
MCC side of transition section
Zobrazit stránku 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Komentáře k této Příručce

Žádné komentáře