Rockwell-automation 20P PowerFlex DC Drive - Frame C Switching Power S Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Rockwell-automation 20P PowerFlex DC Drive - Frame C Switching Power S. Rockwell Automation 20P PowerFlex DC Drive - Frame C Switching Power Supply Circuit Board Fuses User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Installation Instructions
PowerFlex
®
DC Drive - Frame C Switching
Power Supply Circuit Board Fuse Replacement
What This Kit Includes
Two Fuses:
Frame C drives with Switching Power Supply circuit board, SW3-32,
rev. H & below
, one 5x20mm, 2.5A 250V fuse and one 5x20mm,
3.15A 250V fuse
Frame C drives with Switching Power Supply circuit board, SW3-32,
rev. I & above
, two 5x20mm, 2.5A 250V fuses
Two fuse holder caps
What You Need to Do
1. Remove and lock-out all incoming power to the drive.
2. Disconnect the DPI cable from the HIM assembly (if present).
ATTENTION: To avoid an electric shock hazard, ensure that
all power to the drive has been removed before performing the
following.
L1 L2 L3
O
I
Zobrazit stránku 0
1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - PowerFlex

Installation InstructionsPowerFlex® DC Drive - Frame C Switching Power Supply Circuit Board Fuse Replacement What This Kit Includes• Two Fuses:– Fram

Strany 2

2 PowerFlex® DC Drive - Frame C Switching Power Supply Circuit Board Fuse Replacement 3. Loosen, but do not remove, the screws that secure the bottom

Strany 3

PowerFlex® DC Drive - Frame C Switching Power Supply Circuit Board Fuse Replacement 3 5. Disconnect the HIM Communication cable from the connector on

Strany 4 - Remove cable

4 PowerFlex® DC Drive - Frame C Switching Power Supply Circuit Board Fuse Replacement 7. Loosen the two captive screws at the top of the Control EMI s

Strany 5 - F2 = 2.5A

PowerFlex® DC Drive - Frame C Switching Power Supply Circuit Board Fuse Replacement 5 10. Insert the new fuses into the appropriate holders and replac

Strany 6

Publication 20P-IN037B-EN-P - December 2009Supersedes 20P-IN037A-EN-P - March 2009 Copyright © 2009 Rockwell Automation. All rights reserved. Printed

Komentáře k této Příručce

Žádné komentáře