Rockwell-automation 20P PowerFlex DC Drive - Frame C Pulse Transformer Uživatelský manuál stáhnout pdf (Strana 2)

2 Rockwell Automation Publication 20P-IN010C-EN-P - February 2012

PowerFlex DC Drive Frame C Pulse Transformer Circuit Board

What You Need to Do

To install the Pulse Transformer board:

❐ Step 1: Remove power from the drive

❐ Step 2: Remove the protective covers

❐ Step 3: Remove the existing Pulse Transformer board

❐ Step 4: Configure the new Pulse Transformer board

❐ Step 5: Install the new Pulse Transformer board

❐ Step 6: Replace the protective covers and document the change

Step 1: Remove Power from

the Drive

1. Remove and lock-out all incoming power to the drive.

ATTENTION: Remove power before making or breaking cable connections.

When you remove or insert a cable connector with power applied, an electrical

arc may occur. An electrical arc can cause personal injury or property damage by:

• sending an erroneous signal to your system’s field devices, causing unintended

machine motion

• causing an explosion in a hazardous environment

Electrical arcing causes excessive wear to contacts on both the module and its

mating connector. Worn contacts may create electrical resistance.

L1 L2 L3

1 2 3 4 5 6 7 ... 15 16

Žádné komentáře

Rockwell-automation 20P PowerFlex DC Drive - Frame C Pulse Transformer Uživatelský manuál Strana 2