Rockwell-automation 20P PowerFlex DC Drive - Frame B Field SCR Module Uživatelský manuál

Installation InstructionsPowerFlex® DC Drive - Frame B Field SCR Module What This Kit Includes• Field SCR module• Two screws and washers• Two gate lea

10 PowerFlex® DC Drive - Frame B Field SCR Module12. Remove the appropriate gate leads:– For non-regenerative drives, remove each pair of (orange and

PowerFlex® DC Drive - Frame B Field SCR Module 1113. Remove the seven screws that secure the Pulse Transformer and Switching Power Supply boards to th

12 PowerFlex® DC Drive - Frame B Field SCR ModuleStep 4: Remove the Field Board and Existing Field SCR Module1. Remove the wires from connectors UF, U

PowerFlex® DC Drive - Frame B Field SCR Module 13Step 5: Install the Field Board and New Field SCR ModuleInstall the Field board and new Field SCR mod

Publication 20P-IN045B-EN-P - December 2009Supersedes 20P-IN045A-EN-P - March 2009 Copyright © 2009 Rockwell Automation. All rights reserved. Printed

2 PowerFlex® DC Drive - Frame B Field SCR ModuleWhat You Need to DoThe Field SCR module is located below the Field board, which is below the Control b

PowerFlex® DC Drive - Frame B Field SCR Module 3Step 1: Remove Power from the Drive1. Remove and lock-out all incoming power to the drive. ATTENTION:

4 PowerFlex® DC Drive - Frame B Field SCR ModuleStep 2: Remove the Protective Covers1. Disconnect the DPI cable from the HIM assembly (if present).2.

PowerFlex® DC Drive - Frame B Field SCR Module 54. Disconnect the HIM Communication cable from the connector on the upper right corner of the Control

6 PowerFlex® DC Drive - Frame B Field SCR Module3. Remove the cable from connector XTA on the Pulse Transformer board.4. Remove the plug-in terminals

PowerFlex® DC Drive - Frame B Field SCR Module 76. Carefully disconnect the cables from connectors XA, XR and XFCD at the top of the Control board. 7.

8 PowerFlex® DC Drive - Frame B Field SCR Module9. Remove the cable from connector XV on the Switching Power Supply board.10. Remove the cables from c

PowerFlex® DC Drive - Frame B Field SCR Module 911. Remove the ground connection at the left side of the Pulse Transformer board. Remove ground connec