Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Uživatelský manuál stáhnout pdf

Installation Instructions

FLEX I/O

™

Dual Port EtherNet/IP Adapter

Modules

Cat. No. 1794-AENTR, 1794-AENTRXT, Series A

(1794-AENTRXT module is conformally coated to meet noxious gas

requirements of ISA/ANSI-71.040 1985 Class G3 Environment.)

Important User Information

Solid state equipment has operational characteristics differing from those of

electromechanical equipment. Safety Guidelines for the Application, Installation

and Maintenance of Solid State Controls (Publication

SGI-1.1 available from your

local Rockwell Automation sales office or online at

http://www.rockwellautomation.com/literature/) describes some important

differences between solid state equipment and hard-wired electromechanical

devices. Because of this difference, and also because of the wide variety of uses for

solid state equipment, all persons responsible for applying this equipment must

satisfy themselves that each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or

consequential damages resulting from the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative

purposes. Because of the many variables and requirements associated with any

particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of

information, circuits, equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written

permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual we use notes to make you aware of safety considerations.

IMPORTANT

Identifies information that is critical for successful application and

understanding of the product.

WARNING

Identifies information about practices or circumstances that can

cause an explosion in a hazardous environment, which may lead to

personal injury or death, property damage, or economic loss.

ATTENTION

Identifies information about practices or circumstances that can

lead to personal injury or death, property damage, or economic

loss. Attentions help you:

• identify a hazard

• avoid a hazard

• recognize the consequence

SHOCK HAZARD

Labels may be on or inside the equipment, for example, a drive or

motor, to alert people that dangerous voltage may be present.

BURN HAZARD

Labels may be on or inside the equipment, for example, a drive or

motor, to alert people that surfaces may reach dangerous

temperatures.

ATTENTION

Prevent Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which can

cause internal damage and affect normal operation. Follow these

guidelines when you handle this equipment:

• Touch a grounded object to discharge potential static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component boards.

• Do not touch circuit components inside the equipment.

• Use a static-safe workstation, if available.

• Store the equipment in appropriate static-safe packaging when

not in use.

ATTENTION

Environment and Enclosure

This equipment is intended for use in a Pollution Degree 2 industrial

environment, in overvoltage Category II applications (as defined in IEC

60664-1), at altitudes up to 2000 m (6562 ft) without derating.

This equipment is considered Group 1, Class A industrial equipment

according to IEC/CISPR 11. Without appropriate precautions, there

may be difficulties with electromagnetic compatibility in residential

and other environments due to conducted and radiated disturbances.

This equipment is supplied as open-type equipment. It must be

mounted within an enclosure that is suitably designed for those

specific environmental conditions that will be present and

appropriately designed to prevent personal injury resulting from

accessibility to live parts. The enclosure must have suitable

flame-retardant properties to prevent or minimize the spread of flame,

complying with a flame spread rating of 5VA, V2, V1, V0 (or

equivalent) if nonmetallic. The interior of the enclosure must be

accessible only by the use of a tool. Subsequent sections of this

publication may contain additional information regarding specific

enclosure type ratings that are required to comply with certain product

safety certifications.

In addition to this publication, see:

• Industrial Automation Wiring and Grounding Guidelines,

Rockwell Automation publication 1770-4.1, for additional

installation requirements.

• NEMA Standard 250 and IEC 60529, as applicable, for

explanations of the degrees of protection provided by different

types of enclosure.

1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - FLEX I/O

Installation InstructionsFLEX I/O™ Dual Port EtherNet/IP Adapter ModulesCat. No. 1794-AENTR, 1794-AENTRXT, Series A(1794-AENTRXT module is conformally

Strany 2 - ATTENTION

2 FLEX I/O™ Dual Port EtherNet/IP Adapter ModulesPublication 1794-IN131A-EN-P - January 2012European Hazardous Location ApprovalThe following modu

Strany 3 - Mount on a Panel or Wall

FLEX I/O™ Dual Port EtherNet/IP Adapter Modules 3Publication 1794-IN131A-EN-P - January 2012Dual Port EtherNet/IP Adapter – 1794-AENTR, 1794-AENT

Strany 4 - Status Indicators

4 FLEX I/O™ Dual Port EtherNet/IP Adapter ModulesPublication 1794-IN131A-EN-P - January 2012When the adapter is locked onto the DIN rail, gently p

Strany 5 - General Specifications

FLEX I/O™ Dual Port EtherNet/IP Adapter Modules 5Publication 1794-IN131A-EN-P - January 2012General Specifications Indicator StatusLink 1 or Link

Strany 6 - Mounting Dimensions

6 FLEX I/O™ Dual Port EtherNet/IP Adapter ModulesPublication 1794-IN131A-EN-P - January 2012Environmental SpecificationsCertificationsMounting Dim

Strany 7

FLEX I/O™ Dual Port EtherNet/IP Adapter Modules 7Publication 1794-IN131A-EN-P - January 2012Notes:

Strany 8 - Documentation Feedback

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products. At http://www.rockwellau

Další dokumenty pro Zařízení Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP

Zobrazit dokument Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Uživatelský manuál

Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Uživatelský manuál (88 stránky)

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP . Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Adapter Module Installation Instructions User Manual Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Zařízení Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP